Transport Canada's Testing Procedure

[Tideland Prius]

All vehicles, including four-wheel (4x4) and all-wheel drive (AWD),
are tested in 2WD mode; however, results are adjusted to reflect the
increased weight and engine load using 4x4 and AWD systems.
The FTP is composed of two tests. For fuel efficiency purposes, they
may be referred to as the city test and the highway test.

Simulated city course
The city test simulates a 12-kilometre, stop-and-go trip with an
average speed of 32 km/h and a top speed of 91 km/h. The test runs
for 23 minutes and includes 18 stops. Approximately 4 minutes
of test time are spent idling, to represent waiting at traffic lights. The
test begins from a cold engine start, which is similar to starting a
vehicle after it has been parked overnight. When the test is completed,
the test cycle starts again with a hot engine start, and the first
8 minutes of the test are repeated. This simulates restarting a vehicle
after it has been warmed up, driven and then stopped for a
short time.

Simulated highway course
The highway test simulates a 16-kilometre trip with an average speed
of 77 km/h and a top speed of 97 km/h. The test runs for 13 minutes
and does not include any stops; however, the speed varies to simulate
different kinds of rural and highway roads. The test begins from a
hot engine start.