Tire Rack study agrees with what I've found about Tread Depth

Tempus · 07-24-2007, 01:41 PM

The old adage about Tire Tread Depth uses a penny and the top of Abe Lincoln's head to determine when your tread is gone.

This is about 2 mm of tread, and is in line with most safety laws and the 'wear bars' on tires.

My experience has been that tire performance degrades significantly long before that point and I haven't let it get that low in years. That's why I replaced the OEM tires at 40K miles even though I had about 4mm of tread left.

Now, Tire Rack has some objective test data to support this view.

Bottom line, in their opinion 4mm of tread depth is the minimum you should consider running before replacing the tires.

They point out that a Quarter using Washington's Head as the reference is about 4mm.

As far as I can tell, measuring tread depth was the only remaining practical use for a penny. Does this finally signal the end for Abe?

FireEngineer · 07-24-2007, 03:00 PM

Would have loved to see this test at the automakers recommended inflation pressures and the tire max sidewall inflation pressure.

Wayne

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire Tread wear	flareak	Gen II Prius Care, Maintenance and Troubleshooting	21	10-14-2008 05:19 PM
Back Up Camera Depth Perception	jchang31	Gen II Prius Main Forum	9	05-10-2007 07:51 PM
Trashed by Terrorist Tire Tread!	subarutoo	Gen II Prius Main Forum	2	01-31-2006 09:31 PM
Tire Rack disappointment	popoff	Gen II Prius Modifications	4	10-14-2005 10:14 PM
Tire Rack, Bridgestone Turanza's, Goodyear Comfortred	Robert Taylor	Gen II Prius Main Forum	3	03-11-2005 02:15 PM

07-24-2007, 01:41 PM	#1
Tempus Senior Member Join Date: Feb 2004 Location: Washington DC Posts: 1,693 My Car: 2004 Prius Model: Package: #9 Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	The old adage about Tire Tread Depth uses a penny and the top of Abe Lincoln's head to determine when your tread is gone. This is about 2 mm of tread, and is in line with most safety laws and the 'wear bars' on tires. My experience has been that tire performance degrades significantly long before that point and I haven't let it get that low in years. That's why I replaced the OEM tires at 40K miles even though I had about 4mm of tread left. Now, Tire Rack has some objective test data to support this view. Bottom line, in their opinion 4mm of tread depth is the minimum you should consider running before replacing the tires. They point out that a Quarter using Washington's Head as the reference is about 4mm. As far as I can tell, measuring tread depth was the only remaining practical use for a penny. Does this finally signal the end for Abe?

07-24-2007, 03:00 PM	#2
FireEngineer Senior Member Join Date: Oct 2004 Location: SW-Side of Chicago, IL Posts: 1,155 My Car: 2010 Prius Model: IV Package: Solar Roof Thanks: 1 Thanked 50 Times in 38 Posts Friends: 12	Would have loved to see this test at the automakers recommended inflation pressures and the tire max sidewall inflation pressure. Wayne