Another technical question...

texassalsa04 · 06-16-2004, 04:43 PM

I was talking to someone about my Prius recently and he asked about the power split device. Lets say that I was driving at highway speed or cruising speed and I approach a down hill slope. I let off the gas and let the car coast. While coasting, the engine shuts down to conserve fuel. The electric motor may or may not be in motion while the engine is shut down. So, when the engine shuts down, does the rotation force of the power split device some how disengages from the engine so that the pistons are not in motion? otherwise you would create pressure from the pistons going up and down right? I hope I am making some sense. Does anyone know how the power split device works? I have a general idea but no concrete info. on how the device works when engine shuts down or when electric motor is shut down, etc...

**efusco** · 06-16-2004, 05:56 PM

Read Graham's Site first, then come back if you have any remaining questions. That site does a fantastic job of explaining the PSD.

In short, you're somewhat right. The ICE cannot shut down completely beyond 41mph or MG1 will over rev (exceed 10k rpm) so the ICE keeps spinning to prevent just that situation.

texassalsa04 · 06-16-2004, 08:26 PM

Thanks Efusco...I'll check that site out...

Frank Hudon · 06-16-2004, 11:10 PM

this is one of the easiest way's to get your head around the PSD is to go to this website and push the slider buttons on the different sections and watch what happens to the different sections of the PSD
http://homepage.mac.com/inachan/prius/planet_e.html

bookrats · 06-17-2004, 11:57 AM

Also, [url=http://priuschat.com/forums/viewtopic.php?t=1373]this thread has some good pointers to "how the planetary gear works".

I like Graham's site, but found that several of the other sites mentioned in this thread (particularly howitworks.com) eased me into the subject. After digesting these (and the animations, which I think are better), I felt up to tackling Graham's explanation.

texassalsa04 · 06-17-2004, 02:11 PM

Thanks guys...Graham's site is full of technical stuff and I am having a hard time digesting some of it...great site though. I will check the other sites out too...

06-16-2004, 04:43 PM	#1
texassalsa04 Join Date: Jan 2004 Location: Dallas, Texas Posts: 123 My Car: Model: Package: Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	Another technical question... I was talking to someone about my Prius recently and he asked about the power split device. Lets say that I was driving at highway speed or cruising speed and I approach a down hill slope. I let off the gas and let the car coast. While coasting, the engine shuts down to conserve fuel. The electric motor may or may not be in motion while the engine is shut down. So, when the engine shuts down, does the rotation force of the power split device some how disengages from the engine so that the pistons are not in motion? otherwise you would create pressure from the pistons going up and down right? I hope I am making some sense. Does anyone know how the power split device works? I have a general idea but no concrete info. on how the device works when engine shuts down or when electric motor is shut down, etc...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Technical question... How do you change the view option?	burritos	Fred's House of Pancakes	2	10-29-2007 06:50 PM
Looking for a technical manual	wiiprii	Gen II Prius Technical Discussion	3	06-05-2007 06:01 PM
Technical Question: How exactly do the power brakes work?	Solar_Powered	Gen II Prius Main Forum	3	05-07-2005 07:36 PM
Technical question	daniel	Gen II Prius Modifications	1	07-17-2004 08:34 AM
Technical Question for Wayne	green4evr2003	Gen II Prius Main Forum	5	03-16-2004 11:17 PM

06-16-2004, 05:56 PM	#2
efusco Troll Slayer Join Date: Nov 2003 Location: Nixa, MO Posts: 17,231 My Car: 2004 Prius Model: Package: #9 Thanks: 49 Thanked 249 Times in 148 Posts Friends: 37	Read Graham's Site first, then come back if you have any remaining questions. That site does a fantastic job of explaining the PSD. In short, you're somewhat right. The ICE cannot shut down completely beyond 41mph or MG1 will over rev (exceed 10k rpm) so the ICE keeps spinning to prevent just that situation.

06-16-2004, 08:26 PM	#3
texassalsa04 Join Date: Jan 2004 Location: Dallas, Texas Posts: 123 My Car: Model: Package: Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	Thanks Efusco...I'll check that site out...

06-16-2004, 11:10 PM	#4
Frank Hudon Senior Member Join Date: Jan 2004 Posts: 4,144 My Car: Model: Package: Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	this is one of the easiest way's to get your head around the PSD is to go to this website and push the slider buttons on the different sections and watch what happens to the different sections of the PSD http://homepage.mac.com/inachan/prius/planet_e.html

06-17-2004, 11:57 AM	#5
bookrats Senior Member Join Date: Mar 2004 Location: Seattle, WA Posts: 2,843 My Car: Model: Package: Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	Also, [url=http://priuschat.com/forums/viewtopic.php?t=1373]this thread has some good pointers to "how the planetary gear works". I like Graham's site, but found that several of the other sites mentioned in this thread (particularly howitworks.com) eased me into the subject. After digesting these (and the animations, which I think are better), I felt up to tackling Graham's explanation.

06-17-2004, 02:11 PM	#6
texassalsa04 Join Date: Jan 2004 Location: Dallas, Texas Posts: 123 My Car: Model: Package: Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	Thanks guys...Graham's site is full of technical stuff and I am having a hard time digesting some of it...great site though. I will check the other sites out too...