06 EV mode behavior w/ Coastal mod?

[crichman]

The install wasn't particularly difficult... even if I did it 3 times because the behavior I got wasn't exactly what I was expecting.

Once it's warmed up I see exactly the behavior I expect (including my own grins.)

I'm perplexed by startup issues, though. I had understood that I would be able to avoid the initial ICE start by triggering the EV mode promptly, but haven't been able to do so. Is the 2006 behavior different, or is there something else I'm missing?

[unruhly]

There is no indication of "Entering EV Mode" so this is somewhat confusing.

Watch your MFD screen and as soon as the intro screen fades away and the regular (probably Consumption) screen comes up, pull the stalk for EV. As a minimum, you have to wait for the two beeps before attempting. Once the ICE fires, there is no way to enter EV until it has gone through a complete warmup cycle.

[crichman]

<div class='quotetop'>QUOTE(unruhly @ Apr 14 2006, 01:17 PM) [snapback]239758[/snapback]</div>

There is no indication of "Entering EV Mode" so this is somewhat confusing.
[/b]

Yup, that's what got me initially.

<div class='quotetop'>QUOTE(unruhly @ Apr 14 2006, 01:17 PM) [snapback]239758[/snapback]</div>

At a minimum, you have to wait for the two beeps before attempting.
[/b]

What two beeps? I must not be paying attention, and may have assumed that I was hearing seatbelt chimes as I was getting buckled in.

[Tom_06]

I pull back on the cruise control stalk just when the intro screen first shows on the MFD (make sure the "ready" indicator is on). In that case, it comes up in EV mode and the screen shown is consumption, not the energy screen. If I wait for the consumption screen to show, it seems like the engine comes on before I can get it into EV mode. Confused me as well at first. I now use it all the time for moving the car into and out of the garage for washing it, etc.

- Tom

[crichman]

<div class='quotetop'>QUOTE(Tom_06 @ Apr 14 2006, 01:53 PM) [snapback]239775[/snapback]</div>

I pull back on the cruise control stalk just when the intro screen first shows on the MFD (make sure the "ready" indicator is on).
[/b]

Thanks -- that was what I needed to hear.

Way cool.

Charlie