Push Fasteners

bogeybob513 · 05-15-2008, 10:53 AM

Does anyone know of replacement fasteners for the shroud in engine compartment? I damaged some getting the shroud off and would like to replace them with something better. My horns now sound like a real car but my shroud is jitterbugging.

bbald123 · 05-15-2008, 01:33 PM

Look at Toyota Parts Cheap - Genuine OEM

They seem to be in the collision catalog, radiator, splash shield part. But, it's hard to tell from the drawings.

Let me know if you find them.

NoMoShocks · 05-15-2008, 04:01 PM

I agree about finding something better. I have not broken any of my clips, but they are quite loose, some are pretty much held in place by gravity. I'll figure out something and post what I find here.

bogeybob513 · 05-16-2008, 03:06 PM

Couldn't find them in the catalog-I think I'll check the hardware section of some local stores.

Sheepdog · 05-16-2008, 11:21 PM

I would love to get something for mine too. The ones I have on the engine cowling cover are loose as can be. No tightening at all.

edthefox5 · 05-18-2008, 01:56 AM

I see them in all the auto parts stores. Both AutoZone & Advance Auto.

**TonyPSchaefer** · 05-18-2008, 08:46 AM

Quote:

Originally Posted by bbald123

Look at Toyota Parts Cheap - Genuine OEM

They seem to be in the collision catalog, radiator, splash shield part. But, it's hard to tell from the drawings.

Let me know if you find them.

Wow that's a cool site. Very easy to use.

For fear of hijacking the thread, let me ask you this: I backed into something that ripped the black trim off the bottom of the the bumper cover. Upon inspection, the black trim seems to be completely intact, but three fasteners were apparently ripped out and are now lost. Am I correct that I need to order part number 15 in the following illustration?

Sheepdog · 05-18-2008, 09:57 PM

Tony, I think those are the same things we are all complaining about and yes it seems the same.

bbald123 · 05-19-2008, 08:51 AM

I'd say numbers 3, 15, and 18. But, like I said, really hard to tell from the drawing.

05-15-2008, 10:53 AM	#1
bogeybob513 rtc513 Join Date: Oct 2006 Location: Myrtle Beach, SC Posts: 94 My Car: 2006 Prius Model: Package: #6 Thanks: 0 Thanked 1 Time in 1 Post Friends: 0	Push Fasteners Does anyone know of replacement fasteners for the shroud in engine compartment? I damaged some getting the shroud off and would like to replace them with something better. My horns now sound like a real car but my shroud is jitterbugging.

05-15-2008, 01:33 PM	#2
bbald123 Thermodynamics Law Enforcement Join Date: Nov 2007 Location: Harrisburg, PA Posts: 204 My Car: 2008 Prius Model: Package: #6 Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	Re: Push Fasteners Look at Toyota Parts Cheap - Genuine OEM They seem to be in the collision catalog, radiator, splash shield part. But, it's hard to tell from the drawings. Let me know if you find them.

05-15-2008, 04:01 PM	#3
NoMoShocks Electrical Engineer Join Date: Jan 2007 Location: Camas, WA Posts: 1,224 My Car: 2010 Prius Model: IV Package: Solar Roof Thanks: 2 Thanked 49 Times in 31 Posts Friends: 1	Re: Push Fasteners I agree about finding something better. I have not broken any of my clips, but they are quite loose, some are pretty much held in place by gravity. I'll figure out something and post what I find here.

05-16-2008, 03:06 PM	#4
bogeybob513 rtc513 Join Date: Oct 2006 Location: Myrtle Beach, SC Posts: 94 My Car: 2006 Prius Model: Package: #6 Thanks: 0 Thanked 1 Time in 1 Post Friends: 0	Re: Push Fasteners Couldn't find them in the catalog-I think I'll check the hardware section of some local stores.

05-16-2008, 11:21 PM	#5
Sheepdog C'Mere Sheepie! Join Date: Mar 2008 Location: Sanford FLorida Posts: 1,071 My Car: 2008 Prius Model: Package: #2 Thanks: 1 Thanked 2 Times in 1 Post Friends: 7	Re: Push Fasteners I would love to get something for mine too. The ones I have on the engine cowling cover are loose as can be. No tightening at all.

05-18-2008, 01:56 AM	#6
edthefox5 Senior Member Join Date: Jul 2007 Location: Clearwater, Florida Posts: 655 My Car: 2007 Prius Model: Package: #2 Thanks: 1 Thanked 19 Times in 17 Posts Friends: 0	Re: Push Fasteners I see them in all the auto parts stores. Both AutoZone & Advance Auto.

05-18-2008, 09:57 PM	#8
Sheepdog C'Mere Sheepie! Join Date: Mar 2008 Location: Sanford FLorida Posts: 1,071 My Car: 2008 Prius Model: Package: #2 Thanks: 1 Thanked 2 Times in 1 Post Friends: 7	Re: Push Fasteners Tony, I think those are the same things we are all complaining about and yes it seems the same.

05-19-2008, 08:51 AM	#9
bbald123 Thermodynamics Law Enforcement Join Date: Nov 2007 Location: Harrisburg, PA Posts: 204 My Car: 2008 Prius Model: Package: #6 Thanks: 0 Thanked 0 Times in 0 Posts Friends: 0	Re: Push Fasteners I'd say numbers 3, 15, and 18. But, like I said, really hard to tell from the drawing.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plastic Push Fasteners	nwpa	Gen II Prius Care, Maintenance and Troubleshooting	5	10-21-2009 05:18 PM
GM's Plug-In Push	Tideland Prius	Prius and Hybrid News	46	11-29-2007 10:35 AM
How hard to you push from 0 to 60	dwalkerw	Gen II Prius Fuel Economy	39	11-13-2006 04:08 AM
Push-and-Glide above 40 mph	CrazyRussian	Gen II Prius Fuel Economy	17	05-21-2006 11:16 PM
Push Survey	DOC	Gen II Prius Main Forum	3	03-31-2004 06:39 PM