Transaxle Failure

[orange4boy]

Nice work, and inspiring. I bought a 2003 very cheaply with a toast transaxle which I will be replacing very soon. I will post a thread in the Gen I section. I'll post a link here when It's ready.

What special tools did you need and what gaskets/supplies? I know I need a few torx drivers and the fluids but what else? THX.

[dailyphotofix]

Originally Posted by orange4boy

Nice work, and inspiring. I bought a 2003 very cheaply with a toast transaxle which I will be replacing very soon. I will post a thread in the Gen I section. I'll post a link here when It's ready.

What special tools did you need and what gaskets/supplies? I know I need a few torx drivers and the fluids but what else? THX.

When I did mine I did not need any gaskets at all. The only supplies I needed was new fluids which I picked up from the dealership. It was a pretty simple job as far as tools go. Most of the work is getting everything off to get to the transaxle, after that swapping it out is as easy, if not easier than pulling a transmission on a normal car.

Good luck!