x-gauge settings for ...

[mark010101]

Hi,

Does anyone know the x-gauge parameters for:

-MG1 temp
-MG2 temp
-Inverter temp
-Hybrid battery temp
-Regen brake current

I have found (on this forum) the parameters for:

-SOC of the HV battery
-HV battery voltage
-charge/discharge current of the HV battery

Thanks,

Mark

[jdenenberg]

Originally Posted by mark010101

Hi,

Does anyone know the x-gauge parameters for:

-MG1 temp
-MG2 temp
-Inverter temp
-Hybrid battery temp
-Regen brake current

I have found (on this forum) the parameters for:

-SOC of the HV battery
-HV battery voltage
-charge/discharge current of the HV battery

Thanks,

Mark

Mark,

The charge current for the HV battery is the Regen Current when the ICE is not running.

Here is something to try for the HV battery temp. from:
The SGII Xgauge Database - CleanMPG Forums

GAUGE: BATTERY TEMP (UPPER READ)
CONF?: YES, BUT FAILS OF "UPGRADED" SCANGAUGES (3.15*)
UNITS: DEG C
->TXD: 03 C3
->RXF: 01 03 02 CB 00 00
->RXD: 30 08
->MTH: 00 01 00 01 00 00
->NAM: buc
NOTES: (PRIUS) °C MAX FOR THE 5 MS CYCLE


GAUGE: BATTERY TEMP (LOWER READ)
CONF?: YES, BUT FAILS OF "UPGRADED" SCANGAUGES (3.15*)
UNITS: DEG C
->TXD: 03 C3
->RXF: 01 03 02 CB 00 00
->RXD: 38 08
->MTH: 00 01 00 01 00 00
->NAM: blc
NOTES: (PRIUS) °C MIN FOR THE 5 MS CYCLE

JeffD

[mark010101]

Thanks Jeff.

Here's what I found for:
-SOC of the HV battery
-HV battery voltage
-charge/discharge current of the HV battery

SOC of the HV battery
TXD 07E321CE
RXF 056186CE0000
RXD 3008
MTH 000A00020000
NAM SOC

HV battery voltage
TXD 0033
RXF 0100023B0000
RXD 2010
MTH 000100010000
NAM UHV

charge/discharge current of the HV battery
TXD 07E321CE
RXF 056186CE0000
RXD 3810
MTH 0001000AF333
NAM IHV

Mark

[archae86]

Some of the custom Xgauge settings can't be active simultaneously.

I ran into one yesterday I don't recall having been posted.

The codes I'm using for traction battery state of charge (SOC) conflict with the codes for traction battery temperature (blf, buf, or buc). Can't view both at the same time.

Presumably this is the same issue previously reported in which display of some codings for other traction battery parameters conflict with each other.

I think some people have reported the battery temperature codes not to work for them--these people may have had a conflicting parameter enabled for display.

One other point: the Fahrenheit temperatures display nn.n when the temperature is below 100F. This lets you see that they change in integer multiples of 1.8--obviously the actual value on the bus is a Celsius integer value.