1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacing front 9x12 speakers in 2012

Discussion in 'Gen 3 Prius Audio and Electronics' started by davep3913, May 7, 2012.

  1. davep3913

    davep3913 Junior Member

    Joined:
    Apr 4, 2012
    14
    6
    0
    Location:
    oregon
    Vehicle:
    2012 Prius
    Model:
    II
    Replacing front 6x9 speakers in 2012

    Spent a couple of hours on a 30 minute job replacing the front speakers. Used Kenwood kfc 6983ps 4 way 6x9s . Because Toyota uses the strange bracket (standard stereo 6 piece speakers) in the front doors, (the hole in the door is too large for standard 6x9s) , I had to fabricate a bracket out of luanna board (1/8 inch hardwood plywood)...What a pain...but when the job was done, the improvement in sound was amazing...I was having trouble with my ipod music distorting...no more...Its worth the effort but beware...dave
     
  2. tach18k

    tach18k Member

    Joined:
    Feb 21, 2012
    406
    38
    1
    Location:
    SoCal Beach Area
    Vehicle:
    Other Hybrid
    [​IMG]
    I just did mine, front only. I put in Polk, 6-1/2 rounds. I have another set for the read doors. Much better sound. I have to use a bit more volume but its fine. The wood is a bit crude for now, I will correct it next week when I do the rears.
     
  3. Djeayzonne

    Djeayzonne Junior Member

    Joined:
    Apr 8, 2012
    10
    0
    0
    Location:
    Dallas
    Vehicle:
    2012 Prius
    Model:
    Three
    Could one of you guys give a quick tutorial on how you actually made the speaker adapters?

    Will I need a jigsaw or something else? Only have basic tools right now, and a weak power driver.
     
  4. tach18k

    tach18k Member

    Joined:
    Feb 21, 2012
    406
    38
    1
    Location:
    SoCal Beach Area
    Vehicle:
    Other Hybrid
    I took out the speaker from the door, traced out the pattern on the plywood, then the mounting holes, then trial and error on the patteren till it fit right, 10-32 screws and nuts to hold the wood to door. Traced out the speaker pattern on wood, cut it out, I used a sabre/scroll saw, handheld, all done freehand.
     
  5. tach18k

    tach18k Member

    Joined:
    Feb 21, 2012
    406
    38
    1
    Location:
    SoCal Beach Area
    Vehicle:
    Other Hybrid
    Here is how I did the speaker wiring.
    [​IMG]
     
  6. Djeayzonne

    Djeayzonne Junior Member

    Joined:
    Apr 8, 2012
    10
    0
    0
    Location:
    Dallas
    Vehicle:
    2012 Prius
    Model:
    Three
    Oh, well when you say it like, it sounds very easy! I feel like a dork now.

    Are you worried at all about that plywood getting wet?
     
  7. ajtozzi

    ajtozzi Junior Member

    Joined:
    Apr 7, 2012
    94
    13
    0
    Location:
    NJ
    Vehicle:
    2012 Prius
    Model:
    Two
    This is why you should never use wood in a door. Stick to ABS or another type of composite plastic to avoid warping and swelling if it does get wet. Mount the ABS to the door using nutserts and stick some t-nuts into the ABS and mount the speaker using a machine screw - your speaker mounts will last forever.
     
  8. Timw

    Timw Junior Member

    Joined:
    Apr 9, 2011
    55
    11
    0
    Location:
    Southern, PA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Go to Crutchfield, they sell speaker adapters for any vehicle, I got mine for my 2011 Prius there.
     
  9. tach18k

    tach18k Member

    Joined:
    Feb 21, 2012
    406
    38
    1
    Location:
    SoCal Beach Area
    Vehicle:
    Other Hybrid
    As far as water and the speaker bracket, I do plan to change out the plywood to a hard plastic, the plywood is for cutting patterns for better refinements. I also want the frame 1" thick and not 3/4". I most likely will be using UHMW for the frame. I will make a 1/4" templates that are more exact to size.
     
  10. davep3913

    davep3913 Junior Member

    Joined:
    Apr 4, 2012
    14
    6
    0
    Location:
    oregon
    Vehicle:
    2012 Prius
    Model:
    II
    Let me answer a couple of questions....first, the material I used was plywood that had been sealed with a clear spray paint...The brackets will be perminent and if you get water on the inside of the door (where the bracket is mounted) you have some big problems...It is not something to worry about...Secondly, if you are not handy, (just ask your wife if you are not sure) having speakers installed if pretty inexpensive. (frys charges $40.00 for the pair)...I would not change to a 6.5 in speaker when you can use a 6x9...the larger cone has the potential to give you better bass response...
     
  11. Big Steve

    Big Steve ramblin wreck

    Joined:
    Mar 5, 2012
    402
    39
    0
    Location:
    Richmond VA
    Vehicle:
    2012 Prius
    Model:
    Four
    While you were "in" the door, did you add any sound deadening material?

    I am a woodworker so scrollsawing the brackets is a No-brainer. Likewise coating with wipe-on poly.

    BUT how much of a task is opening the speaker cavity?
     
  12. davep3913

    davep3913 Junior Member

    Joined:
    Apr 4, 2012
    14
    6
    0
    Location:
    oregon
    Vehicle:
    2012 Prius
    Model:
    II
    Yes, I soundproofed all doors...I used a combination of 1/2 in felt and 1/2 inch closed cell foam. (It is commonly used in camping pads)....the closed cell foam wont hold moisture so I used this material inside the door where you might get a little water...the sound proofing makes a huge difference in the sound quality of the speakers..The are some nice posts on removing the door panels...pretty simple...you just drill out the rivets and the old speaker comes right out....be sure to solder you connections.
     
  13. tach18k

    tach18k Member

    Joined:
    Feb 21, 2012
    406
    38
    1
    Location:
    SoCal Beach Area
    Vehicle:
    Other Hybrid
    I feel a 6.5 inch round speaker, will give better harmonics than a oval 6x9 speaker. Thats why most bass speakers are round and not ovals. In audio enviorments, its what you do with the componets and using them correctly for the enviorment, than the size and wattage.
     
  14. davep3913

    davep3913 Junior Member

    Joined:
    Apr 4, 2012
    14
    6
    0
    Location:
    oregon
    Vehicle:
    2012 Prius
    Model:
    II
    My info comes from a sound engineer....although the factors for bass response are much more complicated than speaker shape or size.(the most important factor is how the recording engineer sets the eq for the track)...Anyway, givin the choice, I am always going to opt for the largest speaker , the best that I can afford for the best result.
     
  15. ajtozzi

    ajtozzi Junior Member

    Joined:
    Apr 7, 2012
    94
    13
    0
    Location:
    NJ
    Vehicle:
    2012 Prius
    Model:
    Two
    The largest speaker doesn't always produce the most efficent bass response in a vehicle. Car audio is much different than home/pro audio due to loading. A proper enclosure in a vehicle is more important than placement, power and speaker size combined. When customers complain about poor bass response 9 out of 10 times the woofer is incorrectly loaded in the enclosure.

    I've built T-line boxes with four 5" subwoofers that would make your kidneys hurt. I've also heard 12" subs that sound like factory 6"x9" when put in a crap enclosure and loaded in the car incorrectly.
     
  16. Djeayzonne

    Djeayzonne Junior Member

    Joined:
    Apr 8, 2012
    10
    0
    0
    Location:
    Dallas
    Vehicle:
    2012 Prius
    Model:
    Three
    Could you go into detail on what would be the proper way to load it into the Prius?
     
  17. ajtozzi

    ajtozzi Junior Member

    Joined:
    Apr 7, 2012
    94
    13
    0
    Location:
    NJ
    Vehicle:
    2012 Prius
    Model:
    Two
    Since the Prius platform has not traditionally been a huge demographic for audio I can't say I have ever done any large systems in a Prius. Therefore my answer is based on some limited research and some first hand playing around with my own car (2012 Prius).

    From a conserving space stand-point and a "give and take" or "best of both worlds" scenario a 10" driver that performs well in .6 ft3 net sealed would be ideal for mounting above the battery in the right rear corner of the trunk. I do not know the resonant frequency of the Prius so I can't comment on final box tuning.

    From an output perspective, and taking into account that the car is a hatchback, I'd look to load something off the trunk floor directly behind the rear seats. Three 8" down-firing in a sealed enclosure ~or~ two 8" down-firing in a slot ported box ~or~ a single 8" in a T-line box would, tuned correctly, theoretically, know your socks off.

    I'm waiting for my company to release a new woofer and I plan on doing a down-firing T-line box that should do low 140s with music.

    To answer your question a little more, cars are so variable it's very hard to design something without a lot of trial and error unless you have done it before, multiple times, with similar results. You can have amazing bass output, then, roll down the window and BOOM - it all changes. You can have increased output or you can loose up to 6db (I've witnessed both!).

    If it's SPL you are after then the Prius isn't the right car for the job. If it's more than average output it's totally do-able and the design of the car (hatchback) lends itself to doing so with minimal equipment. If it's SQ you are looking for, then buy a new car! While the Prius is a nice car, it's not designed for high-quality SQ (I'm talking HIGH QUALITY - not $200 drop in speakers). The dash and doors are so oddly shaped and designed that proper imaging is a nightmare in the car without A LOT of customization.

    With all that said 98% of users will be perfectly happy with whatever route they go as long as they choose quality equipment and have it installed properly/professionally (or DIY'ed in a professional manner).

    If you REALLY want to know more about speakers, read this book: http://www.amazon.com/Loudspeaker-Design-Cookbook-Vance-Dickason/dp/1882580109

    If you want to learn more about car audio start here:http://www.amazon.com/dp/product/1588870405?tag=priuschatcom-20
     
  18. davep3913

    davep3913 Junior Member

    Joined:
    Apr 4, 2012
    14
    6
    0
    Location:
    oregon
    Vehicle:
    2012 Prius
    Model:
    II
    Well guys and girls...this thread has really gone sideways....This thread was about a simple, same size, pretty low cost, front speaker replacement...the kenwood speakers dont have rockin bass...but then again, Im not a "cruisin in the hood" kind of guy...I drive a prius...trust me..sound proofing the doors and replacing the factory speakers made a real difference...If you want to wake up the neighborhood when you drive by with your 1300 watt amp and sub woofer the size of a cow...Im not so sure an enviornment correct car like the prius is appropriate...can you say 67 chrysler imperial???????
     
  19. Big Steve

    Big Steve ramblin wreck

    Joined:
    Mar 5, 2012
    402
    39
    0
    Location:
    Richmond VA
    Vehicle:
    2012 Prius
    Model:
    Four
    Dave, I think your goal matches mine. Just a bit better sound, and some sound deadening. I will probably look for a place in Richmond area to do it. I am pretty sure I could, but a knowledgeable person/shop can probably do it better/faster.
     
  20. ajtozzi

    ajtozzi Junior Member

    Joined:
    Apr 7, 2012
    94
    13
    0
    Location:
    NJ
    Vehicle:
    2012 Prius
    Model:
    Two
    If you're looking for someone local to you I recommend Howe Audio in Midlothian. Contact Chris there; he will take very good care of you. Feel free to tell him Anthony from Sony referred you.

    www.howeaudio.com