1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HID Install OPT7

Discussion in 'Gen 3 Prius Audio and Electronics' started by daczone, Jan 24, 2014.

  1. daczone

    daczone Junior Member

    Joined:
    Jan 22, 2014
    28
    22
    0
    Vehicle:
    2010 Prius
    Model:
    IV
    I just bought my Prius IV last weekend. LOVING the gas mileage. + the Prius seems to do many things RIGHT, Things you wonder why all cars aren't like that. The keyless entry system for one. At first it seemed weird not putting the keys someone and I caught myself throwing them under the shifter cubby only to forget them when I got out. Then I realized I never needed to get them out in the first place, so they stay in my pocket.

    Okay on the the point:
    I wanted to replace my standard lights with HID's. I looked around and read all kinds of horror stories, did more research and I decided on the OPT7 kit (CHEAP)... I went with the 5000K in color. Paid about $65 for the kit.
    I found an article that warned against cheap Ballasts, Flicker issues, Shadow Issues, Extra Relays... I choose the OPT7 kit based on that.
    They claim:
    • Ultra Bright 3600 lumen Z-ArcTM "Mini-ball" Xenon bulb: Produces a 5x brighter light then halogen, uses 35% less power, increases visibility, and made to last with a 5000-hour non-fading lifetime

    Installation couldn't have been easier, Installed both sides in less than 15 minutes. The kit comes with the extra Relay, but I didn't use it. According to my math a 55 watt halogen consume about 4-4.5 Amps each. These Ballasts like 3.2 Amps running and 5 Amps at startup. So I didn't use the relay.
    The bulbs are setup with the ground wire at the 6 O'Clock position, so no shadow issues. The kit came with anti-flicker caps (They plug in series to the bulb connectors). I didn't use them.

    They work great and look factory. If anyone is thinking about it, I highly recommend the OPT7 kit.
     
  2. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,842
    3,099
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Thanks for the review, I saw those on Amazon, but there weren't any reviews. (y)

    SCH-I535
     
  3. deore

    deore Junior Member

    Joined:
    Mar 12, 2014
    26
    10
    1
    Vehicle:
    2010 Prius
    Model:
    Two
    I installed these a couple of days ago, all went pretty smoothly, but I'm not sure about the light output. The bulbs just seem a bit dim. It's hard to tell without having a car to compare to, but imo hid's should be brighter. I have the 35W and 5000k set.
     
  4. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,842
    3,099
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Make sure the bulbs are seated properly. If they aren't seated properly, or off angle, the light output suffers and you can melt your housing.

    SCH-I535
     
  5. deore

    deore Junior Member

    Joined:
    Mar 12, 2014
    26
    10
    1
    Vehicle:
    2010 Prius
    Model:
    Two
    Thanks. To be sure I double checked that, but the bulbs are properly set. I'll have to compare these lights to another HID equipped car when I get the chance. Also I have to get somewhere without road lights. It's surprisingly hard to find a dark place in a city!
     
  6. OdobO

    OdobO New Member

    Joined:
    Apr 1, 2014
    2
    0
    0
    Vehicle:
    2014 Prius
    Model:
    Two
    I am interested in getting this kit too... do any of you have a before and after picture for comparison?
     
  7. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,842
    3,099
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    If the HID bulb's capsule, where the arc is generated, is in a position that is significantly different relative to the filament in the oem halogen bulb, light output can suffer. Placing the light source either closer or farther into the projector changes the effectiveness of the reflector behind the bulb and the ability of the lens to properly focus the light.

    Since HIDs are up to 3x brighter than halogens, most people find the output an improvement, even if the bulb position is not optimal in a drop in kit.

    SCH-I535
     
  8. rrg

    rrg Active Member

    Joined:
    May 18, 2010
    458
    120
    41
    Location:
    East coast - NJ
    Vehicle:
    2011 Prius
    Model:
    Two
    If you don't see an improvement with the new ballast's and bulbs, the kit it not doing it's job.
    I did the 4300k - 35W HID Retrofit source kit install and the difference is a 40-50% improvement.

    The most noticeable part are the squirrel finders that can reflect the street signs way down the road.
    Double the distance than before, IMHO.
     
  9. 04priusnow

    04priusnow Active Member

    Joined:
    Apr 30, 2013
    345
    200
    0
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    II
    I used the opt7 55w kit at 5k color. Allot Better than the stock halogens..i tried some other brands but they would flicker. Also i am running these on the stock wiring harness

    LG-LS980 ?
     
  10. randalla

    randalla Member

    Joined:
    Jan 22, 2004
    370
    2
    0
    Location:
    Lexington, SC
    Vehicle:
    2012 Prius v wagon
    Model:
    Five

    Hi there! I'm considering installing the 5000k 55watt OPT7 kit into my 2012 Plug-in Prius. Can you tell me where/how you did the power hookup? thanks!
     
  11. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,842
    3,099
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Posted response and picture in the other thread you asked in:

    OPT7 55w HID kit - Prius 2014 package 3 | PriusChat