1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Disable seatbelt beep.

Discussion in 'Gen 3 Prius Technical Discussion' started by Jonathan Ciaccio, Jul 30, 2014.

  1. Jonathan Ciaccio

    Jonathan Ciaccio Junior Member

    Joined:
    Jun 27, 2012
    2
    2
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Hey Folks. Does anyone know how I can disable the seatbelt beep on my 2010? I have OBDII scanner and enginelink but I cant find any PIDs about seatbelts.

    And before anyone says it's dangerous, Im doing this for two reasons

    1) I drive around a lot at about 15 MPH. That's why I got the 2010 with EV mode. And I dont always want to click on my seatbelt.
    2) I load things in my front passenger seat which triggers it all the time.

    Thanks for the help.
     
    #1 Jonathan Ciaccio, Jul 30, 2014
  2. Shin Chan

    Shin Chan Junior Member

    Joined:
    Sep 11, 2008
    56
    6
    0
    Location:
    Sacrameto, California
    Vehicle:
    2006 Prius
    You need to use a scanguage not an obd-II. There are a few how to videos on YouTube. The most helpfully how to video i found was from a guy working on his diesel truck.
     
    #2 Shin Chan, Jul 30, 2014
  3. sushi1026

    sushi1026 107mpg

    Joined:
    Oct 2, 2008
    69
    31
    35
    Location:
    New Jersey
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    You can use the attached PID. In case you want to disable the reverse beep too I've attached that PID as well. I didn't disable my seatbelt but did disabled my reverse beep. Also disclaimer I have a PiP, but I don't think it's any different.
     

    Attached Files:

    #3 sushi1026, Jul 30, 2014
    MrKite and 7-0-SAV like this.
  4. FrankB

    FrankB Member

    Joined:
    Dec 12, 2012
    117
    53
    1
    Vehicle:
    2010 Prius
    Model:
    II
    I used the instructions here to change the beeping to a single beep.
     
    #4 FrankB, Aug 1, 2014
  5. qdllc

    qdllc Senior Member

    Joined:
    Aug 25, 2013
    1,358
    396
    0
    Vehicle:
    2013 Prius
    Model:
    Two
    Would it be smarter to just disconnect the sensor in the passenger seat that triggers the alarm? I'd not recommend you drive without your seat belt...period.
     
    #5 qdllc, Aug 2, 2014
  6. testuserER

    testuserER Guest

    0
    +1

    The worst injuries are often caused by ANOTHER vehicle........and you can get thrown around pretty bad just at 15 MPH......AND the air bags can actually make matters WORSE without the seat belt in use.

    So, I too encourage you to use your seat belt EVERY time you move the car more than 50 feet or so.
    What happens on the passenger side if you latch the belt with nobody in the seat ??
     
    #6 testuserER, Aug 3, 2014
    qdllc and Jon Hagen like this.
  7. qdllc

    qdllc Senior Member

    Joined:
    Aug 25, 2013
    1,358
    396
    0
    Vehicle:
    2013 Prius
    Model:
    Two
    Very good idea. I've known people to do that on the driver's side to avoid the buzzer. :eek:
     
    #7 qdllc, Aug 3, 2014
(You must log in or sign up to post here.)