1. Attachments are working again! Check out this thread for more details and to report any other bugs.

PSI range for Low side port

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by ahartnet, Aug 27, 2014.

  1. ahartnet

    ahartnet Junior Member

    Joined:
    Aug 27, 2014
    7
    2
    0
    Vehicle:
    2006 Prius
    Model:
    II
    I've seen a couple of threads on this, but wasn't able to find the exact answer I am looking for, and I'm not smart enough to figure it out on my own.

    My A/C hasn't been seeming too cold lately. It works, it just takes a lot longer than I remember it last summer to get cool. I checked my low-side port using a "EZ chill" gauge I just bought. Doors open, AC max cold, recirculating and it was about 35 PSI - which I think is supposed to be about right. But I've seen it's dependent on ambient temperature - it was 90 degrees outside. According to the "EZ chilll" gauge, it suggests 45-55, which seems way to high to me based on what I've read in this forum.

    Any advice?

    Unrelated - I've only just started getting into DIY on my car. It's always been intimidating to me, but it's been a lot of fun, cost effective, and a lot easier than I would have though too!
     
  2. johnjamis

    johnjamis Junior Member

    Joined:
    Jul 4, 2009
    79
    13
    0
    Location:
    KY
    Vehicle:
    2012 Prius
    Model:
    Two

    If you see clear fluid flowing with no bubbles in the AC sight gauge, your refrigerant level is OK. If you see a continuous flow of bubbles, you probably need more fluid.
     
  3. exstudent

    exstudent Senior Member

    Joined:
    Jul 11, 2009
    2,214
    901
    0
    Location:
    Torrance, CA
    Vehicle:
    2007 Prius
    Original thread w/ similar question you have. Specs below and Toyota testing procedure in this LINK, are for a 2007 Prius.

    Low Pressure 35PSI = .2413MPa(Mega-Pascal) [specifications .15MPa-.25MPa]. GOOD, w/in specifications.
    High Pressure not provided by OP. [specifications = 1.37MPa-1.57MPa]. UNKNOWN if High Pressure w/in specs.
    Online PSI to MPa converter. LINK
    Good luck.