1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Fog Light Light bulb change?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Christian_cool, Mar 5, 2015.

  1. Christian_cool

    Christian_cool Junior Member

    Joined:
    Jun 7, 2014
    92
    16
    0
    Location:
    Germany
    Vehicle:
    2010 Prius
    Model:
    III
    Hello Everyone.
    I have a Prius gen 3 equipped with fog lights from new. My question is how do i change the light bulb? My question sounds simple but I tried to lift my car with a jack, and take out the plastic protection plate with screwdriver under the Fog Lights and take out the bulb with my hands, no luck.. i changed my normal beam lights lot of times, but this seems tricky for me.
    Any advice to do it easier thanks?
     
    #1 Christian_cool, Mar 5, 2015
  2. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,673
    38,213
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Are you taking out the plastic panel under the bumper?

    Capture.JPG
     
    #2 Mendel Leisk, Mar 5, 2015
  3. Christian_cool

    Christian_cool Junior Member

    Joined:
    Jun 7, 2014
    92
    16
    0
    Location:
    Germany
    Vehicle:
    2010 Prius
    Model:
    III
    Thanks for your advice, Yes its that plastic cover i take out. And before i tried to rotate the bulb but it feel like it was stuck actually both of them and they have never been changed in 4 and half years. I will try again tomorrow and see if i can take the bulb out, else there must be a way to take the whole fog light assembly out?
     
    #3 Christian_cool, Mar 5, 2015
  4. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,673
    38,213
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Ok sorry I misunderstood. I know in the past trying to turn bulbs for removal they can be stubborn. It's bayonet-mount style I think. Usually doubly hard because you can hardly get your hand on it. Dare I say gently tap it, to break friction? Maybe a small shot of silicon would help, as long as you can keep it controlled, just on the bayonet threads.
     
    #4 Mendel Leisk, Mar 5, 2015
  5. Christian_cool

    Christian_cool Junior Member

    Joined:
    Jun 7, 2014
    92
    16
    0
    Location:
    Germany
    Vehicle:
    2010 Prius
    Model:
    III
    Yes your right. I will try to apply something like silicon or a bit oil to make it easier and more force to it with my hand so i hope it helps. But its a bid tight since i cant lift my car more than 10 cm up until the lifter begins to tilt dangerously, i am trying to avoid my dealer since i have bad experience from them.


    Thanks for your advice :)
     
    #5 Christian_cool, Mar 5, 2015
  6. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,848
    3,102
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    The bulbs are the same as the lowbeam headlights (H11), and you rotate them about a quarter turn counter clockwise to remove them.

    They are probably a little stuck, since they haven't been moved for years. Just grab the base of the bulb and rotate it firmly counter clockwise, it will "break" free.
     
    #6 xliderider, Mar 5, 2015
    Christian_cool likes this.
(You must log in or sign up to post here.)