PVC Valve Location

Here's the manual for it.

 

Fro doz,
Little off subject but can you post something ,maybe an attached file, on a new thread ,how to get into the HV fan assy to clean it out on a gen 2. Thanks

 

Sorry...I do have the GEN II Service Manual currently loaded. While I do have the GEN III material (which is likely similar), someone else might better provide the specifics you need for your application.

 

Just diving in is probably as good a course as any. You'll likely have to pull up the hatch floor. If it's like 3rd gen, there's some tenacious fasteners. Makes you think you've missed a bolt or something.

 

Will explore utube more too, mine is a gen 2.
Maybe I will download manual, where should I look for it?

 

OR - remove the under body and remove it like that. I removed the plastic from under, unclipped the hose with my finger and used a wrench to remove it. Took about 10 minutes total time.

 

Thanks, So your talking about under the HV fan, inside the cars cargo backseat area?

 

Judging by the content, I think that was from a poster who paid too much attention to the thread title and thought it was still about the PCV valve.

As far as the service manual, the sure-fire place to look is techinfo.toyota.com.

-Chap

 

thanks Chap, bet ur right, thought I had an easy way out for a second...

 

Watch this video on taking out a HV battery, it'll show you how to take everything out........if you are just doing the fan, just do the right half of the car and do not continue to anything else. You should have all your information before the 5:00 mark of the video.

 

This covers and links for Gen II & III PCVs.

Pcv valve? Where are you? | PriusChat

 

The car itself is not a bad teacher, too. If you just take it slow and logical, keep your parts sorted, you'll get there.

 

My response was to the actual PCV in the engine bay, not to anything doing with the rear of the vehicle.