1. Attachments are working again! Check out this thread for more details and to report any other bugs.

FOB response slow???

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by kknguyen1168, May 23, 2015.

Page 1 of 2
  1. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    All

    last couple my FOB response slow, I thought it was FOB battery, I replaced it, no help, If I stay about 20ft in front of the car I can not lock it, I have to stay close to the door before I can lock it. Do you think it is my 12v battery? my Scangauge 2 still show 14.2v; any idea please let me know.

    V/r

    Khoi Nguyen
     
    #1 kknguyen1168, May 23, 2015
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    it's not your 12v. do you have the spare fob to try?
     
    #2 JC91006, May 23, 2015
  3. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    JC91006

    Yes I did, tried spare one too, same thing.
     
    #3 kknguyen1168, May 23, 2015
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I don't know the range of the fobs, I usually only use SKS to enter and lock the car. Seems odd both fobs do the same.
     
    #4 JC91006, May 23, 2015
  5. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    JC96001

    I usually use the FOB lock my car from my garage, I can not do that anymore with both FOB. Please try your should be work with 50ft.
     
    #5 kknguyen1168, May 23, 2015
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    try it outside your garage
     
    #6 JC91006, May 23, 2015
  7. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    did that too
     
    #7 kknguyen1168, May 23, 2015
  8. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    what's your 12v measure? it shouldn't be 14.2v if it's off.
     
    #8 JC91006, May 23, 2015
  9. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    from Scangauge 2; why do you think if off?
     
    #9 kknguyen1168, May 23, 2015
  10. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    a new 12v should measure 12.8 or higher. seeing you have 2010, it probably would be weaker, closer to 12v. If it's less, then you should replace it since it's 5 years old.

    but I still can't imagine that causing the issue.
     
    #10 JC91006, May 23, 2015
  11. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    JC91006

    That what I want to find out, I had Scangauge2 connected to ODB2 for last 4 years, always keep my eyes to it, but Scangauge2 indicate 14.2v, how do you find out your battery is going bad?
     
    #11 kknguyen1168, May 23, 2015
  12. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Since your battery is 5 years old, just assume it's bad and buy another one. It's not going to last that much longer.
     
    #12 JC91006, May 23, 2015
  13. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    Well, Just went to Auto part to check the battery, the battery still check out good. What do you think next.?
     
    #13 kknguyen1168, May 23, 2015
  14. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Did you replace the batteries in both your fobs? If yes, the batteries might not be good
     
    #14 JC91006, May 23, 2015
  15. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    Well, I thought the same thing, went out and buy a new one, cost me 4.99 form Target CR1632, guess what? no different. please keep it coming.
     
    #15 kknguyen1168, May 23, 2015
  16. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    The car receiving unit/antenna for the fob. But since it works and the range is shorter, you would have to somehow disturb that. And I don't know where that's located
     
    #16 JC91006, May 23, 2015
  17. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,848
    3,102
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    That 14.2v your scangauge is measuring isn't the battery voltage, it's the operating voltage when the traction battery is online and supplying current to the 12v auxiliary battery.
     
    #17 xliderider, May 23, 2015
  18. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    xliderider

    ok, do you know where can I tell my battery volt when I look at my scangauge?
     
    #18 kknguyen1168, May 23, 2015
  19. CR94

    CR94 Senior Member

    Joined:
    Dec 2, 2014
    2,642
    1,134
    0
    Location:
    Northwestern S.C.
    Vehicle:
    2011 Prius
    Model:
    Two
    Press the bottom right button on the ScanGauge when the car has been shut down with everything off for a few hours. Enter through the right door so you won't start the brake pump doing its thing by entering the driver's door.
     
    #19 CR94, May 23, 2015
  20. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    CR94

    It had been almost 4 hours, just did what you recommend and the Scangauge showed 12.2V, is that good?
     
    #20 kknguyen1168, May 23, 2015
(You must log in or sign up to post here.)
Page 1 of 2