1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Pioneer AVIC-Z140BH in Prius C

Discussion in 'Prius c Audio and Electronics' started by Lockdown Security, Jun 2, 2012.

  1. TxTkd

    TxTkd New Member

    Joined:
    Nov 16, 2012
    16
    6
    0
    Vehicle:
    2012 Prius c
    Model:
    One
    Thanks, finally the Steering control worked :) I have to sliced the 2 wires (pink & blue) to tap into it. Last night I tried with the male crimp, but apparently that doesn't work(or may be I don't know how to crimp a wire properly :) ).
    Well, the error message is still poping up. Please see some of the pictures for reference. Currently I temporary crimp the wire, to verify the system photo1.jpg photo2.jpg photo3.jpg photo5.jpg works first, later I might solder the wires.
    Not sure if I need to connect the system remote control wire from the HU to anything?
    The brown wire(mute) from metra harness to?
    The blue wire-Metra 40-LX11? currently I connected it to the blue/power antenna of the metra 70-1761? is it correct?
     
  2. Nate28

    Nate28 Junior Member

    Joined:
    Dec 20, 2012
    54
    16
    2
    Location:
    San Diego
    Vehicle:
    2012 Prius c
    Model:
    One
    Did you ever get this unit sorted out? Also any luck on the OEM Microphone? I just purchased a Pioneer AVIC-Z120BT (very similar to your unit) and could use all the info I can get to make this install go smoothly.