1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Thin Plastic Alert! Cabin Air Filter Cover

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by Mr Incredible, Nov 23, 2012.

  1. Mr Incredible

    Mr Incredible Chance favors the prepared mind.

    Joined:
    Jun 23, 2008
    955
    506
    0
    Location:
    Neb
    Vehicle:
    2012 Prius c
    Model:
    Four
    Be advised, removing the cover on the cabin air filter can easily break the tabs.

    The cover has two tiny ears on the left side that fit into tiny little hoops on the housing. These hoops are EASILY broken, especially when cold. This is not the place for impatient bullinthechinashop mechanic techniques.

    You have been warned.
     
    minkus likes this.
  2. Ryephile

    Ryephile The Technophile

    Joined:
    Jul 10, 2012
    418
    151
    24
    Location:
    Metro Detroit
    Vehicle:
    2012 Prius c
    Model:
    Two
    Thanks for the heads up. When I had my interior apart doing my stereo wiring, I went and removed the cabin filter just to see how it went together. IMO it was easy and a non-issue, but then again I default to tip-toeing around unknown bits instead of going straight for the sledgehammer.
     
  3. Mr Incredible

    Mr Incredible Chance favors the prepared mind.

    Joined:
    Jun 23, 2008
    955
    506
    0
    Location:
    Neb
    Vehicle:
    2012 Prius c
    Model:
    Four
    It probably wouldn't have been an issue if that was all I was doing and it had my full attention. As it was, I'm lucky I didn't break both tabs. I'm sure the delicate nature of that setup was a great weight saver.

    It shouldn't be much trouble to develope a fix for the broken hoop whenever I'm in there next time.
     
  4. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    There's a universal solution: duct (or duck) tape. Toyota managed to take a simple procedure on the Gen2 & transform it into a PITA. I suppose their next step would be to just eliminate the door.
     
  5. Mr Incredible

    Mr Incredible Chance favors the prepared mind.

    Joined:
    Jun 23, 2008
    955
    506
    0
    Location:
    Neb
    Vehicle:
    2012 Prius c
    Model:
    Four
    I have a pile of broken anvils behind the shed.

    I can easily screw something up by thinking a little differently than the designer of whatever it is I'm working on. That, plus COLD plastic and it's a guaranteed catastrophe.

    I was thinking of fixing it with a piece of sheet plastic, cut out in the appropriate shape, and a drilled hole as the receiver of the male tab. Then, whatever would be appropriate to modify the receiving area. Then J-B Weld. I've had great luck with that stuff. That, and Gorilla Tape.
     
  6. Ryephile

    Ryephile The Technophile

    Joined:
    Jul 10, 2012
    418
    151
    24
    Location:
    Metro Detroit
    Vehicle:
    2012 Prius c
    Model:
    Two

    LOL! You're quite a character. Thanks for the chuckles. JB Weld is fun stuff, as is Gorilla Tape :)
     
  7. KaliforniaKid

    KaliforniaKid 2013 Prius v Five 2012 Priuc c Four

    Joined:
    Aug 24, 2012
    184
    63
    0
    Location:
    Nuthern Kalifornia
    Vehicle:
    2015 Prius c
    Model:
    Four
    The only acceptable use of Gorilla, Duct or Duck Tape for vehicle interiors, especially the Prius C...

    [​IMG]
     
  8. crebble

    crebble Member

    Joined:
    Mar 16, 2012
    176
    46
    0
    Location:
    Shohola PA
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I just changed my cabin air filter as well. The thoughtful techs at Toyota left the white cover loose after I refused their kindly offer to change it at the 15K service. Yes, the white cover is very flimsy. Weight savings=better MPG.

    I used the STP CAF1816P. $13.99 at Autozone.

    Hardest part of the whole job was compressing the glove box enough to clear the 2 tabs. I was waiting for the crunch as the plastic broke.
     
  9. John D. Hoge

    John D. Hoge New Member

    Joined:
    Dec 23, 2012
    1
    0
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    I had great difficulty, too, getting the tabs on my glovebox to disengage. I thought that they might well break before I finally got them both disengaged. I also could find no mounting supports for the pneumatic plunger arm. Sure it was attached to the glovebox lid, but there was nothing up inside the dashboard for the other two mounting holes to attach to. I don't think I'm crazy here. I used a good flashlight and could find nothing to which the body of the plunger would mount. Help me out if you can! P.S. After doing the filter change, I got to thinking about using my Drimmel to cut down the size of the tabs on the lid. Maybe next time!

     
  10. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    There is a tab on the right side (as you look at it). The trick is to get the ------ thing to stay on during reassembly. I haven't found a way to do it so the plunger rides in the lower glovebox.
     
  11. Siva Ganesh

    Siva Ganesh Junior Member

    Joined:
    Jul 7, 2012
    16
    4
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Excel
    I was trying feel around there for lose bits as there was some rattle coming from there, and accidently pulled-off the pneumatic plunger arm off the base! Took the car back to te dealer and it took about 5 minutes for the mechanic to fix it!
     
  12. Mr Incredible

    Mr Incredible Chance favors the prepared mind.

    Joined:
    Jun 23, 2008
    955
    506
    0
    Location:
    Neb
    Vehicle:
    2012 Prius c
    Model:
    Four
    If I recall correctly ( a major victory, if true), as I was fooling with getting the glove box door back in, the plunger thingy was the least of my worries. The two tabs/ears were the toughest without breaking things.

    I believe I found a secret handshake for that, but I haven't remembered to try it again to see if it worked -- Remove the bottom of the door first, then the two tabs are easy to remove and insert. Then, when replacing the door, put in the tabs first and then the bottom of the door last.

    I will try mightily to try this soon. The temp is way down here, and I've never had good luck with any cold plastic parts. I'd have to put the heater WAY high for a while.
     
    paul_p likes this.
  13. paul_p

    paul_p Junior Member

    Joined:
    Sep 23, 2012
    5
    3
    0
    Location:
    Southern NH
    Vehicle:
    2012 Prius c
    Model:
    Three
    Yes, I am about to try this and agree that with NH temps in the 20s, plastic parts are at significant risk for breaking. Will wait until its warmer - regardless of dirty cabin air! :)
     
  14. The Electric Me

    The Electric Me Go Speed Go!

    Joined:
    May 22, 2009
    9,083
    5,795
    0
    Location:
    Undisclosed Location
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Thanks for the warning.
    I haven't had to do this yet. But now, I'm nervous about it.

    Now I don't know if I should do it myself and take the responsibility when I inevitably break the tabs. Or should I allow the dealership service department to over charge me for the service, then be indignant when I discover THEY broke the tabs?
     
  15. jharwd

    jharwd Junior Member

    Joined:
    Feb 27, 2014
    10
    3
    0
    Vehicle:
    2012 Prius
    Model:
    Three
    Go To Youtube and watch the video on how to change the cabin filter.
     
  16. jack520

    jack520 Member

    Joined:
    May 15, 2011
    154
    40
    0
    Location:
    California
    Vehicle:
    2014 Prius Plug-in
    Model:
    Plug-in Base
    What a kludge of a design.

    I broke the bottom part of the left hook,,,has anyone figured out how to fix it ?

    I think you just superglue it ?

    Thanks ahead of time.
     
  17. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    only thing i've seen is a piece of duck tape, but superglue is worth a try.