1. Attachments are working again! Check out this thread for more details and to report any other bugs.

AC blower motor issues

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Steve Disser, Oct 5, 2015.

Tags:
  1. Steve Disser

    Steve Disser New Member

    Joined:
    Sep 6, 2015
    9
    2
    0
    Location:
    Nashville
    Vehicle:
    2010 Prius
    Model:
    Three
    I apologize in advance, as I'm sure this has been addressed, but I couldn't find anything in a search.

    My AC/heater blower in my 2010 has stopped working (I don't have the sunroof with a blower). It worked intermittently for a few days and then stopped all together. The LCD readout shows the fan working at different speeds depending on where I set the controls, but nothing is happening.

    What's the typical issue with these? Or is there one particular thing that can be singled out? I hope it's just a bad blower because I can easily replace that myself. Any ideas?
     
    #1 Steve Disser, Oct 5, 2015
  2. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,347
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
     
    #2 frodoz737, Oct 5, 2015
    bisco, Steve Disser and GrGramps like this.
  3. Steve Disser

    Steve Disser New Member

    Joined:
    Sep 6, 2015
    9
    2
    0
    Location:
    Nashville
    Vehicle:
    2010 Prius
    Model:
    Three
    Thank you! Looks easy enough. So, do you know if it continued to work or did it ultimately have to be replaced? Is this your video?
     
    #3 Steve Disser, Oct 5, 2015
  4. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,347
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
    No, just passing on a video found when looking to replace mine for low flow. Recommend you check yours as shown before buying new as most electrical parts are non returnable.
     
    #4 frodoz737, Oct 5, 2015
    Steve Disser likes this.
  5. Steve Disser

    Steve Disser New Member

    Joined:
    Sep 6, 2015
    9
    2
    0
    Location:
    Nashville
    Vehicle:
    2010 Prius
    Model:
    Three
    That's good advice and much appreciated!
     
    #5 Steve Disser, Oct 6, 2015
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,796
    48,995
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    great video, thanks to frodo and the gentleman who made it!
     
    #6 bisco, Oct 6, 2015
  7. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,723
    38,252
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Bad news that black wire is hot and white is ground, asking for trouble.
     
    #7 Mendel Leisk, Oct 6, 2015
  8. phoenixgreg

    phoenixgreg Senior member

    Joined:
    Apr 7, 2010
    1,157
    288
    66
    Location:
    Phoenix
    Vehicle:
    2010 Prius
    Model:
    II
    Oddly this color scheme is not consistent as I found out with some of the parking lamps. The white wire was hot and the colored wire was ground.
     
    #8 phoenixgreg, Oct 7, 2015
  9. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,723
    38,252
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Sounds like Toyota doesn't have enough control with sub contractors: typically ground wire would be black, or at least a dark or earth tone color.
     
    #9 Mendel Leisk, Oct 7, 2015
  10. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,347
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
    In the real world its about wire numbers and pin numbers.
     

    Attached Files:

    #10 frodoz737, Oct 8, 2015
(You must log in or sign up to post here.)