1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Re-Attaching The Hood Release Cable ?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by king mob, Aug 16, 2015.

  1. king mob

    king mob Junior Member

    Joined:
    Nov 7, 2012
    8
    1
    0
    Vehicle:
    2012 Prius
    Model:
    Four
    I got the hood release cable off to remove the LH lower dash (where the mirror adjust cluster is), and I am struggling getting the hood release cable T-end onto the handle... HOW do I get the cable back on ??

    thanks
     
    #1 king mob, Aug 16, 2015
  2. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    the same way you took it off but reverse the process
     
    #2 Beachbummm, Aug 16, 2015
  3. MrPete

    MrPete Active Member

    Joined:
    Oct 26, 2011
    401
    154
    20
    Location:
    Colorado, USA
    Vehicle:
    2011 Prius
    Model:
    Two
    Unfortunately, I'm having the same problem, and the response above doesn't actually help.

    Any hints? the cable just pops out of the slot before I have a chance to get the cylinder in place. Maybe I just don't remember the exact detail of how it popped out...
     
    #3 MrPete, Feb 6, 2016
  4. AzWxGuy

    AzWxGuy Weather Guy

    Joined:
    May 22, 2011
    968
    490
    0
    Location:
    Tucson, AZ
    Vehicle:
    2021 Prius
    Model:
    Limited
    I just took a look at my setup, and it appears to be sort of a standard cable pull arrangement with ball ends retained in slots. Like hand brakes on a bicycle. I suspect that with the hood closed there may be some unruly tension at the release lever inside the car. You might try releasing the other end of the cable at the hood release mechanism, which should give you sufficient cable to work with inside the car.
     
    #4 AzWxGuy, Feb 6, 2016
  5. MrPete

    MrPete Active Member

    Joined:
    Oct 26, 2011
    401
    154
    20
    Location:
    Colorado, USA
    Vehicle:
    2011 Prius
    Model:
    Two
    I solved it. It's actually NOT the reverse of how I got it off.
    2016-02-06 16.28.24.jpg
    To get it on: FIRST get the cylindrical button back in place where it belongs (top of the photo). Then, stretch the cable as needed to slide it into the slot (bottom of photo) and seat the sheath end in the white plastic socket (also at bottom.)

    (The way I got it off: pulled the release, held the wire in "stretched" position, released the button, then detached the cable from the socket.)
     
    #5 MrPete, Feb 6, 2016
    DigitalNomad likes this.
(You must log in or sign up to post here.)