1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Odd dangler- under car

Discussion in 'Gen 3 Prius Main Forum' started by eeek, May 28, 2016.

  1. eeek

    eeek Junior Member

    Joined:
    Feb 22, 2015
    18
    1
    0
    Vehicle:
    2015 Prius
    Model:
    Four
    I was out tonight and walked up to my car in a open lot. This gave me the ability to see underneath the car. I saw something hanging underneath it. I crawled under and got this shot. There's no fluids, no issues with the car, and it drives great. This thing, to me, looks like some sort of support. I can kind of make it out on the hi rez undercarriage shots- looks like there are two on both sides. I plan on taking it in Tuesday, but, in the meantime, should I 1) not drive it or 2) can I bend it back in place?
     

    Attached Files:

    #1 eeek, May 28, 2016
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    wow, you must have run over a porcupine. keep driving!:p
     
    #2 bisco, May 28, 2016
  3. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,862
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    #3 JimboPalmer, May 28, 2016
  4. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,041
    7,580
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    While learning to drive, my son, at 110km/hr ran over a dead KANGAROO which had been partly flattened already, but the BANG was awful. He said he thought the VOLVO 940 was higher off the ground - nope.

    We stopped and looked, no damage obvious.

    When I got home, I looked closer, and there was kangaroo fur all along the floorpan stuck to the undersealing. Still there when I sold the car.
     
    #4 alanclarkeau, May 28, 2016
    wrprice and bisco like this.
  5. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,240
    692
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    you might need an extension to straighten the hanger out/

    BION
    StarCaller
     
    #5 StarCaller, May 29, 2016
  6. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,518
    1,790
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Looks more like where the exhaust heat recirculation piping runs through...

    Screen Shot 2016-05-29 at 8.26.53 AM.png
     
    #6 RRxing, May 29, 2016
    bisco likes this.
  7. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,981
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    You should get a muffler place to fix that. It puts extra strain on the piping letting it dangle.
     
    #7 David Beale, May 29, 2016
  8. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,667
    38,207
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Yeah, the rubber bit is supposed to be connecting to a second pin, on the underside car body. As-is, it's putting extra stress on the adjacent hangers, and the exhaust's maybe lower than it should be. There's coolant hoses connecting in around there too.

    Definitely should get up on a hoist and looked at asap. There might be more.
     
    #8 Mendel Leisk, May 29, 2016
(You must log in or sign up to post here.)