1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Big Red Triangle and Hybrid Warning Light

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by mjf777, Jul 25, 2016.

  1. mjf777

    mjf777 Junior Member

    Joined:
    Aug 15, 2011
    9
    1
    0
    Location:
    Encinitas, CA
    Vehicle:
    2006 Prius
    Model:
    Three
    Hey everyone,

    The last few weeks I've been noticing that, upon start, the hybrid battery is showing at 1 line. It's been really hot in SO cal and the air con has been blasting, so I've been letting it charge up a bit before driving. Once I'm on the road, the battery charges fine and seems to hold a charge.

    However,today I forgot to let it charge up and got the giant triangle of death and the hybrid warning light on the main console.

    In hunting through the forums it looks like it may be the 12V battery. I did the diagnostic check on the battery current and it was around 11.8V on READY.

    Wondering if this is the issue, or the inverter, or (least wanted) the hybrid battery going out.

    Any thoughts on next steps.

    HUGE thanks.
     
    #1 mjf777, Jul 25, 2016
  2. fotomoto

    fotomoto Senior Member

    Joined:
    Apr 22, 2009
    5,597
    3,771
    0
    Location:
    So. Texas
    Vehicle:
    Other Hybrid
    The warning lights have thrown OBD trouble codes. Get them read via the OBD port under the dash below the steering wheel and you'll know where you stand.

    Major auto parts stores will read them for free but usually can't see all hybrid specific codes like a Toyota or hybrid specialist can.
     
    #2 fotomoto, Jul 25, 2016
  3. mjf777

    mjf777 Junior Member

    Joined:
    Aug 15, 2011
    9
    1
    0
    Location:
    Encinitas, CA
    Vehicle:
    2006 Prius
    Model:
    Three
    Thanks for the quick response. Will track one down and see what I get. Cheers.
     
    #3 mjf777, Jul 25, 2016
  4. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,198
    6,463
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    If the car is READY when you are measuring 11.8V, then the DC/DC converter is not working. The usual reason for that is the inverter coolant pump has failed. Look for turbulence in the coolant reservoir which shows the pump is working.

    If the voltage measurement is OK when the car is cold, then the inverter itself is still OK.
     
    #4 Patrick Wong, Jul 25, 2016
  5. mjf777

    mjf777 Junior Member

    Joined:
    Aug 15, 2011
    9
    1
    0
    Location:
    Encinitas, CA
    Vehicle:
    2006 Prius
    Model:
    Three
    Thanks Patrick! Super helpful. Will be checking the codes and will check the pump in the morning.

    Cheers.
     
    #5 mjf777, Jul 26, 2016
  6. orenji

    orenji Senior Member

    Joined:
    Aug 17, 2013
    5,884
    3,486
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    My 2010 with 60K miles just threw the ABS light and VSC light, only have had the car for a month, also noticed when the warning lights come on the and I brake, the recharge bar is only showing one bar even at full stop. The warrning lights come on for a while then will shut off. I have no idea when the 12 volt was replaced if ever. I am thinking its the 12V, does that sound right?
     
    #6 orenji, Jul 26, 2016
  7. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,468
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    There's a recall on 2010 brakes
     
    #7 JC91006, Jul 26, 2016
  8. orenji

    orenji Senior Member

    Joined:
    Aug 17, 2013
    5,884
    3,486
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    Thanks, I purchased it from a Toyota Dealer, I would think they would have preformed all the latest recalls?
     
    #8 orenji, Jul 26, 2016
  9. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,468
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I would just bring it back
     
    #9 JC91006, Jul 26, 2016
  10. orenji

    orenji Senior Member

    Joined:
    Aug 17, 2013
    5,884
    3,486
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    Yeah, that would be the easy way of doing it....:)
     
    #10 orenji, Jul 26, 2016
  11. andrewclaus

    andrewclaus Active Member

    Joined:
    Sep 15, 2009
    993
    323
    0
    Location:
    Golden, CO
    Vehicle:
    2007 Prius
    The ABS issue is a "warranty enhancement," rather than a recall. Look at the concurrent thread here to get a copy of the letter if you didn't get yours in the mail.
     
    #11 andrewclaus, Jul 26, 2016
(You must log in or sign up to post here.)