1. Attachments are working again! Check out this thread for more details and to report any other bugs.

05 Prius Bearing/Pulley Noise

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Mil-town Prius, Aug 21, 2016.

Page 2 of 2
  1. Mil-town Prius

    Mil-town Prius Junior Member

    Joined:
    Jun 17, 2011
    11
    0
    0
    Location:
    milwaukee
    Vehicle:
    2005 Prius
    Model:
    II
    where do I find those instructions on bleeding the system ?
     
    #21 Mil-town Prius, Aug 25, 2016
  2. andrewclaus

    andrewclaus Active Member

    Joined:
    Sep 15, 2009
    993
    324
    0
    Location:
    Golden, CO
    Vehicle:
    2007 Prius
    I used my Bentley manual, but there are multiple posts here and on YouTube.

    You'll see references to using a paper clip or an ammeter to bypass a relay to run the CHRS pump and that works fine if you're careful--don't short out a fuse or run the pump too long (30s max). I used the MiniVCI, a powerful DIY tool that's relatively inexpensive ($25) and runs on a Win7 laptop.
     
    #22 andrewclaus, Aug 25, 2016
(You must log in or sign up to post here.)
Page 2 of 2