The C has no belts.
GEORGE: Our overall finding in this report is that your Prius' engine is still maturing very nicely. Most
metals (including iron, copper and...
Report says 5w-20?
How'd you do it. What did you use?
You are totally wrong. I have a Scangauge that is set up to read battery charging amps and it shows good current going into the battery when slowing...
You may have something wrong. Is it factory cc?
Mine applies the regen brake to maintain speed going downhill.
I use it all the time for extra...
I wish I knew what you are talking about.
I suppose that with the strong electrical fields generated by the high current and voltages of a hybrid, an external antenna is needed to get as far...
But on a tow dolly, you put the Driven wheels on the dolly. On a Prius the Driven wheels are the front wheels which also steer the car. So if the...
3/32 is much too small to cut the flange off, try at least 3/16.
Why do you need the steering unlocked if the car is on a dolly?
You must set up your gauge to be in "Hybrid" mode. Then it will not cut off when your motor stops.
Read your book.
Quote: i have really little knowledge with tihs stuff - i was basically going to swap out my old speakers with the new... :) figured that would be...
Not a big problem. I finished my Polks today. You can hook them up directly to the OEM woofer wires, but you must retain the stock tweeters which...
Installation question for you guys:
I'm putting Polk DB651s in my C and have a wiring question. What do I do with the OEM tweeter? Just leave it...
It drives like that in ECO. Normal. Check that.
Yes, I took it off, too difficult to mask. B2finity above posted good instructions on how to remove it. It really was simple, just be careful....
The paint I used to on mine was Krylon Fusion for Plastics, Satin Black. I've used it before and it holds up well.
Thanks for the clear instructions. I was hesitant to tear the dash up, but it went well. I just finished painting mine black and it looks great....
Separate names with a comma.