Hi Pedaler, You can try the command by lopezjm2001: XGAUGETXDRXFRXDMTHNAMNotes Set Battery Cooling Fan...
The part I highlighted in blue says the result is treated as a signed number. From my experience, both the multiplicand/multiplier and...
Here is the quote from the XGauge Coding document: From my actual experience on FW 3.17, the results from the multiply and divide is not...
It is the same linear equation; y = Mx + C The min. value is -50 ºC when x = 0, -50 = M * 0 + C C = -50 The max. value is 205.9 ºC when x =...
Nope, the data should be the same, just the way I formatted it to give an additional decimal place. You should be able to read up to 99.9 ºF. I...
If you've entered RXF correctly, you should get AA6 directly. There is no need for manual conversion to Hex. I'm still working on the sub codes,...
Thanks! It is working for me as well. Vincent
I 've resend it, pls check again. I 've created a thread of Xgauges for the C, most of them are the same as the Liftback except for a few...
Me too. I also get Unspecified Error when I tried to post a conversation. Vincent
The SGII is like any other generic scan tool that only scan for emission-related codes; i.e. mode $03. For all DTCs including emission-related...
Did you set up the Snapshot function? This function allows you to record for 5 sec. up to 60 min. and then prompt to save to a file. You can then...
Hi B2FiNiTY, Yes, it is stated on your Owner's manual. [ATTACH] Vincent
Hi Mikey The Mailman, I also use Trip meter B to track lifetime FE. It too rolled over at 9999.9 km. I 've not noticed any changes in the...
TS requires SAE J2534 compliance devices and ELM327 is not. Vincent
Hi boppo, You need to edit the IT3System.ini in Program Files\Toyota Diagnostics\Techstream\Env Change TISFunction=1 to 0 Do make sure you...
You can use the Data List Manager to build your own custom list, just select those you want to monitor. Vincent
AFAIK, there are 2 versions of Mini VCI; firmware ver. 2.0.1 and 1.4.1. I got the former 2 yrs ago which has support for K and L and the latter...
Hi PriusWI, The wires may look OK but you should use a multimeter to test for open/short. Be sure to check the connectors too, I had a P3030 code...
Hi Denny63, It could be your buddy never pressed the Park button before shutting off. Prius C Trip Summary Screen ?? | PriusChat Vincent
w2co did ohm out the SGII cable in this thread. Pin 4 & 5 are tied together. Vincent
Separate names with a comma.
