Hi Alpha, mmmodern is not being too harsh. In fact what he states is very real. I have 2 converted Prius that I did more for enjoyment than for...
Hi Alpha, Not enough information here. The best general advise I would give is to go find an installer that has an ongoing installation shop and...
Hi wb9k, Thanks for the added comments. I am not knowledgable on the active system hardware so my thinking on that was only theoretical. So the...
Hi wb9k, Thanks for this coment and a NUGET. You state capacitors. In acutallity all the top balance BMS systems I have seen are not capacitors...
Hi Tex, No, Powin is not an installer. I have been to their site. They are the import warhouse that got stuck with the extra Enginer inventory of...
Yes, I can see that the "hit it hard, then back off" can be a good approach. We almost need to do this "hit it hard" to turn on the drain resistors...
Hi W, Thanks again for this information. These are Pouch cells. They are built at 8.2mm thickness. They are stacked 16 pouches high and then put into...
Let me go on to another battery question. I had someone associated with Realforce tell me that this was most likely not plating but rather a vapor...
Hi W, I agree with you that what I have done is very risky for damaging cells again. I do need to pull the added cell off. However, removing them...
Hello Everyone, I put 2ea 3.3ah cells in parallel with my week cell 11. The realforce pack is sealed in a metal box, so this added capacity is on the...
I don't think I can make anything clearer in an image that I can post. If you want more detail I can Email you the raw data. Thanks, Dan
Hello Everyone, I drove 35 miles yesterday and estimate that 12 mile of that was from electrons from the Enginer system. I am guessing that means...
Hello W, Yes, This has been helpful to me. You are the battery expert that we all needed 3 years ago. Much of what you discribe, I have experianced...
Hello W, Yes, the BMS Balancing left a lot to be desired. Yes, I am sure that I had some plating in the Mottcells. Enginer has never had a good...
Hello Lopez, I am confident that the CellLogs are acurate. They repeat day to day and they repeat when I change CellLogs. I have used about 8 of them...
So on with the story.... After about 1.5 years of good operation I started to get a cell in the RealForce 2kwhr pack going low earlier and earlier. I...
Hi W, Let me resond to a couple of your comments. No, Enginer did not give information on any of their designs. I hope I did not add to...
Hi W, I think you are not understanding. The resistor and electronics is buried inside the MottCell Plastic box. the box is sealed. [ATTACH] There...
I promised More... I tent to keep track of system cappacity using "electrical miles" That is, I take the MPG on a trip and compare that to the...
Hi W, You sound just like me. I have had to repeat questions for people that I was trying to help. I am sorry for skipping some things. The system is...
Separate names with a comma.
