1. Attachments are working again! Check out this thread for more details and to report any other bugs.

DOP security Option?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by chang50012, Apr 30, 2014.

  1. chang50012

    chang50012 Junior Member

    Joined:
    Mar 24, 2014
    16
    1
    0
    Location:
    WA
    Vehicle:
    2014 Prius
    Model:
    Two
    After review the PC board and identify the MVCI cable and techstream are a good tools to have since the on board display does not really provide ALL the information for us.

    I am not trying to make drastic changes and just try to get my feet wet and understand what this tools could provide and do for owner like me.

    Run into a option and could not find too much information about it.

    Under the Customize Parameter/Security, it seems like we could enable the "DOP" security once we turn it on under "Option setup"

    My questions for expert out there are:

    1. What this this "DOP" Security for?
    2. Does the 2014 Prius two (base model) has this function at all?

    Thanks in advance
     

    Attached Files:

    #1 chang50012, Apr 30, 2014
  2. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,240
    692
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    good question /
    I enabled it but changed it back right away ; just not brave enough to run into unknown problems/

    BION
    StarCaller
     
    #2 StarCaller, May 1, 2014
  3. chang50012

    chang50012 Junior Member

    Joined:
    Mar 24, 2014
    16
    1
    0
    Location:
    WA
    Vehicle:
    2014 Prius
    Model:
    Two
    StarCaller,

    Thanks for the feedback. Hope someone knows more about this topic.

    I found on other web site it may works with the GBS (Glass Break Sensor) but there is no detail on what DOP security for.
     
    #3 chang50012, May 1, 2014
  4. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,240
    692
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    I turned it on again & searched here for DOP/
    found a few old threads which claimed that the alarm worked with gen2's /
    well, I tried everything - nada, no alarm at all/
    now the question is, WHY is it there & one can enable it with 2014 model?

    The Security System Question, Again! | PriusChat
     
    #4 StarCaller, May 1, 2014
  5. WolfpackBill

    WolfpackBill Senior Member

    Joined:
    Mar 28, 2014
    349
    500
    6
    Location:
    Lexington, NC
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    Bringing up an old thread here but I was very close to buy the RS3200+ security system then I stumbled onto this thread. Since I don't really need glass break sensor so I plugged in my computer and turned on security system and voilà! It works!! To try it out I opened the window, locked it, while keeping the key away from the car I reached in and opened the door after about 30 seconds. The alarm went off. Very nice!! Thanks for saving me some money!!
     
    #5 WolfpackBill, Feb 22, 2015
    Last edited: Feb 23, 2015
  6. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,240
    692
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    hmm, maybe I should give it another shot//
     
    #6 StarCaller, Feb 22, 2015
  7. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,240
    692
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    nope, still not working/
     
    #7 StarCaller, Mar 15, 2015
(You must log in or sign up to post here.)