Gen III aftermarket wheel thread...post your pictures

The drop looks good. I like the bronze and BP combo.

Thanks, but the color is called Titanium... its not really bronze in the sunlight, its like a golden silver, if that makes sense? Basically, way more silver than gold as in bronze. I'll try to get some better, non phone pictures soon. If anybody cares, there is easily room for a 9 inch rim under the front if you roll the fenders just a little bit.

Sti... whats the offset of those 5zigens? Can you post a side shot so i can see how flush the wheels are to the fender.

I might wanna try to stick some 18x8.5 +45's on there and flush it up with the fender with a little camber and slightly stretched tires.

Nice looking options here.. question is... do I want to start modding my Prius... hmmmmmm

Well done. This is starting to be a classic wheel that pretty much looks good on anything.

They are 17x8 with a 48 offset. the front is perfectly flush with the fender, if it were lower id need stretched tires or rolled fenders. the rear could use slightly less offset, maybe a 5mm spacer, i think my ten mm would bring it out too far with out camber. which brings this question, rear camber how?

You guys are killing me. So tempted to buy wheels for my ride now... and I swore off that I was done with aftermarket wheels after my last BMW... that any wheel bigger than 15" was not going to be on the Prius...but now...

Tasteful 18's are beautiful on a prius. A part of me wishes I kept the 18" trd 5 spokes I had, but I think I'm gonna be happy with 16" typeF's

Here´s a Winter grey with 17" AEZ rims and 215/45´s:

I ordered up a set of 18-inch Work Meister SP1 3-piece. Will be sure to post pics once I get them!

Question for those of you running with Enkei RPF1's: do the OEM TPMS fit or do you run without them?

HIMPG, I think I saw you on the 91 west yesterday...you running oem 17s?

Haha... I am running OEM 17s but not sure if I was on the 91 yesterday. I was on the 22 briefly.

Yeah, what's the point? Why didn't Toyota just produce the Prius with the heaviest metals they could find, shape it in the form of a brick like the Scion xB, and have it ride on mud tires...

Y gonna post pictures here? Curious op2:

Uh... I wasn't really thinking about posting picts since they are just the stock rims and not aftermarket. They'll look exactly like the ones on your Prius.

Sorry, my mistake. :bolt:
I was starring at your avatar picture which didn´t seem very OEM to me. (Yet quoting your perfectly clear statement).
I any case, is there any larger resolution pictures anyware from the avatar photo shooting?
Thanks.

Here's a couple quick pics of mine with my temp wheels that have been on about a year now. New wheels are coming from Japan in about 3 weeks. Cannot wait!! Will definitely change the whole look of the car. Had recently put the Tanabe DF210 springs on and has made the car look real good with these wheels already. Can't imagine what the new ones will look like. Let me know what you think. I sold my stock 17's to buy these which are Enkei EKM3's in a 17x7. Used original tires. I like but it will be better, I promise.

I'll post pics of the ssr's next week!