1. Attachments are working again! Check out this thread for more details and to report any other bugs.

License plate lights

Discussion in 'Gen 3 Prius Accessories and Modifications' started by ePrius, Dec 17, 2009.

  1. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    Hey all,
    Has anyone had any trouble removing the license plate lights?

    I read the owners manual and follow the instructions on how to take it out and after continuous effort the thing won't budge.
     
    #1 ePrius, Dec 17, 2009
  2. HI MPG

    HI MPG Active Member

    Joined:
    Aug 25, 2009
    789
    133
    93
    Location:
    Orange County, CA
    Vehicle:
    2010 Prius
    Model:
    IV
    No issues with it. It should come out fairly easily with a firm pull. If that doesn't work, you might have to use a flat head screwdriver to slightly separate the unit from the tabs holding it in place.
     
    #2 HI MPG, Dec 17, 2009
  3. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    No problems here. First week I had the car I replaced all exterior bulbs, and had no issue with any of them, following owners manual instructions.
     
    #3 stream, Dec 17, 2009
  4. darelldd

    darelldd Prius is our Gas Guzzler

    Joined:
    Jan 17, 2006
    6,057
    389
    0
    Location:
    Northern CA
    Vehicle:
    2006 Prius
    Lots of problems with the earlier cars. Nice to hear that the new ones are done better!
     
    #4 darelldd, Dec 17, 2009
  5. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,933
    16,157
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Well the difference is that our problem is the getting the actual plastic piece off followed by getting the socket base out.

    The Gen 3 problem is getitng the bulbs out of the socket (at least that was the problem in my case).

    I'm assuming you can't take the bulb out of the socket?

    I had one easy bulb and one stuck bulb. I use electrician tape and a pair of pliers to gently pull the bulb out.


    if you're talking about twisting the socket out of the car itself, umm... try some WD-40 or jigga-loo and see if that helps.
     
    #5 Tideland Prius, Dec 18, 2009
  6. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    I'm having trouble turning it. The manual says "turn counter clockwise and pull." Tried it (several times) and won't budge.
     
    #6 ePrius, Dec 18, 2009
  7. jmb2010

    jmb2010 Junior Member

    Joined:
    Oct 23, 2009
    14
    6
    0
    Location:
    North Carolina
    Vehicle:
    2011 Prius
    Model:
    IV
    I had same problem you are having. Used a pair of locking pliers with cloth and turned gently. They appeared to be stuck. After I put them back, it was possible to remove them by hand as per owners manual. NOTE GENTLY!
     
    #7 jmb2010, Dec 18, 2009
(You must log in or sign up to post here.)