1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How to remove rear windshield wiper for replacement?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by BlizzardP, May 15, 2010.

  1. BlizzardP

    BlizzardP New Member

    Joined:
    Oct 17, 2009
    10
    2
    0
    Location:
    Boston Area
    Vehicle:
    2010 Prius
    Model:
    III
    I'm no way paying the dealer, who claims there are no refills for the blades, for a whole new blade... I want to replace the blade with a Rain X 16 in. Does anyone know how to take the blade off? And yes, I serached... :)
     
    #1 BlizzardP, May 15, 2010
  2. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,901
    16,126
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    If it's the same as the old Prius, the rubber blade is held in by 3 or 4 "rails" in the wiper arm itself. The blade is also supported on either side by two thin metal strips. All you have to do is to pull out from the middle (so the blade arcs) and slowly pull the top (I find the top easier than the bottom. Either end works) out from the first "rail". Once that's out, just pull the rest of the blade out.


    For pics, check john1701a.com and look for the Prius User Guide.
    John's Stuff - Toyota Prius User-Guide

    It's for the Gen 2 Prius but the rear wiper should be similar.
     
    #2 Tideland Prius, May 15, 2010
  3. BlizzardP

    BlizzardP New Member

    Joined:
    Oct 17, 2009
    10
    2
    0
    Location:
    Boston Area
    Vehicle:
    2010 Prius
    Model:
    III
    So you can only replace the blade insert.. not the whole blade itself?

    Thanks!
     
    #3 BlizzardP, May 16, 2010
  4. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,901
    16,126
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Ohh, sorry I must've misread your initial post. I thought you just wanted to replace the insert.

    I believe the entire arm is replaceable (I have heard of PCers who have swapped theirs out for a longer wiper assembly). mmm... Search "mitsubishi" and "wiper"... maybe those threads will have instructions on how to replace the entire thing.
     
    #4 Tideland Prius, May 17, 2010
  5. Joe166

    Joe166 New Member

    Joined:
    Dec 19, 2009
    720
    96
    0
    Location:
    South Florida
    Vehicle:
    Other Hybrid
    Model:
    V
    You can replace the insert or the entire blade. I have NEVER had a blade go bad on me in many years of owning cars. Once in a while I would replace a blade because it got scratched up or faded, but for a Gen III, I don't think you need to do that. Just replace the insert. It is easy and most car parts places will install it for you. I know Advance Auto Parts advertises that they will install wiper blades and inserts if you buy them there.
     
    #5 Joe166, May 17, 2010
  6. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,850
    1,843
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    When I replace the inserts in the front wiper in my 2004 Prius, I cut one of the old ones to the correct length for the rear and use that to refresh the rear wiper insert $0 :).

    JeffD
     
    #6 jdenenberg, May 18, 2010
(You must log in or sign up to post here.)