1. Attachments are working again! Check out this thread for more details and to report any other bugs.

What type of 12v battery would be in a 2007...

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by scott3294, Mar 6, 2011.

  1. scott3294

    scott3294 New Member

    Joined:
    Feb 25, 2009
    30
    0
    0
    Location:
    Atlanta Georgia
    Vehicle:
    2011 Prius
    Model:
    Three
    AGM, Gel, or Wet.

    Thanks!!
     
    #1 scott3294, Mar 6, 2011
  2. seilerts

    seilerts Battery Curmudgeon

    Joined:
    Mar 7, 2010
    3,326
    1,512
    38
    Location:
    Santa Fe, NM
    Vehicle:
    2005 Prius
    36 amp-hour AGM. Is yours going bad?
     
    #2 seilerts, Mar 6, 2011
    1 person likes this.
  3. scott3294

    scott3294 New Member

    Joined:
    Feb 25, 2009
    30
    0
    0
    Location:
    Atlanta Georgia
    Vehicle:
    2011 Prius
    Model:
    Three
    Yep...very weak!
     
    #3 scott3294, Mar 6, 2011
  4. seilerts

    seilerts Battery Curmudgeon

    Joined:
    Mar 7, 2010
    3,326
    1,512
    38
    Location:
    Santa Fe, NM
    Vehicle:
    2005 Prius
    Unfortunately, replacement options are limited. Definitely try putting it on a charger first, at 4 amps or less. If that fails to bring it back to 12.4V after sitting overnight, then the two popular replacement options are another one from the dealer or an Optima Yellowtop deep cycle. I did the Optima conversion using the elearnaid.com kit and am very happy with it. Lots of stories and opinions here if you search.
     
    #4 seilerts, Mar 6, 2011
    1 person likes this.
  5. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,870
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    You want a AGM battery with a vent, as the battery is in the passenger compartment with you. You do not want battery acid or fumes/gases loose around you or your loved ones.

    The fitment is odd because of the JIS battery posts, but the elearnaid kit handles that.
    http://www.elearnaid.com/12vo1topraub.html
     
    #5 JimboPalmer, Mar 6, 2011
    1 person likes this.
(You must log in or sign up to post here.)