USB Aux Switch Mod for aftermarket HU

Is it to use a usb stick and connect it to an aux radio input? They didn't explain that part in detail. If so can a mini-version be used in the console connection of the Prius? (I may be doing too much wishful thinking here)

 

Boy,
I'd like to see where that's connected, I've got more darned wires running through velcro loops fro my SCANGAUGE and GPS. If I could hook that USB connector in one of the vacant plugs by the Dash dimmer (and Fog Light addition) it would be so much simpler and neater.

 

Actually, my GPS and my cellphone can be charged from a usb port, that would be my interest. I can hook my mp3 in the console for both power and connecting to the stereo.

 

Geese,
Thanks for doing my homework.
Take care

 

Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future

PAC has a USB Cable designed to be either surface mounted or flush mounted.

I don't know the dimensions. I don't know if it will reasonably good.

A lot cheaper then the Toyota parts.

 

Where will you install this? Inside the armrest console, in place of the aux audio input?

 

My Kenwood DNX 9960 is provisioned for A/V, USB and Apple devices. These ports are extended with 2 ea. generic 3.5 cords and 2 ea. http://www.datapro.net/products/usb-panel-mount-b-to-a-cable.html 3' cables. The AUX port location in center console seemed open to beverage spills and under Bridge area is used as the daily stuff tray. I chose this option as an alternative. http://priuschat.com/forums/attachment.php?attachmentid=28813&stc=1&d=1300029910 Forward USB plays music and/or movies off thumb drives or external HDs. Side 3.5's are A/V and side USB, used with the 3.5's, for iPads, iPones, ect...via http://www.kenwoodusa.com/Car_Entertainment/eXcelon/Accessories/KCA-iP301V. Parking Brake wire from HU is grounded so that devices can be played, Nav positions entered and built in DVD player can be used while driving (by the right seat passenger for you Lawyers ). Upper glove box can be closed while in use with devices inside.

 

Opps, I used 2 USB Panel-Mount Type A Cable -- DataPro #1598-03C USB cables (A-A), not the B-A's (#1589-03C).

 

We have a 2011 Pkg # 3 we'd like to add a USB port to, just to power the iPod for long trips. Can't wait to hear how this fits, looks - and works!

 

Did you have to remove the entire "box" to mount the jack? The panel surrounding the jacks looks like it might pop off but I don't see any screws or clips.

 

bump... interested in the answer to this question as well.

Looks great Frodoz!

 

I found the answer. The panel surrounding the lighter socket and blank plate can be removed. Either fingers or a small pry bar, screwdriver.

I wound up removing the the port, putting the blank back and installing (having the shop which installed the unit) move it to the console replacing the aux input.

Audiovox has a cable which includes a "toyota fit" port which fits in a standard Toyota dash opening. The cable is (just) long enough to install in the console box.

It's being included with some of the newer units and can be ordered ($35) . Current Prius units come with the generic media link module which is generally mounted in the glove box.

 

Fantastic USB install. How did you make the cut outs in the upper glove box panel? What tool did you use?