1. Attachments are working again! Check out this thread for more details and to report any other bugs.

DIY repair shop work?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by fonze, Apr 5, 2011.

  1. fonze

    fonze Junior Member

    Joined:
    Apr 5, 2011
    5
    0
    0
    Location:
    Central New York
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I am considering getting a Prius (specifically 2005 right now.)

    I have always done most car repairs myself: including brakes/rotors, gas tank swap, mufflers, belts/tensioners, etc.

    If I get a Prius, will I have to take it to a shop for these repairs? Or is the car setup so I can still do my own repairs?
     
    #1 fonze, Apr 5, 2011
  2. jadziasman

    jadziasman Prius owner emeritus

    Joined:
    Jan 17, 2011
    1,355
    487
    0
    Location:
    District 6
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    For "simple" repairs, no. The ICE side of the Prius is not much different than a Corolla or Echo. The hybrid side is obviously the challenge and something to keep in mind before buying a Gen II Prius.
     
    #2 jadziasman, Apr 5, 2011
  3. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,852
    1,847
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    including:

    • brakes/rotors - As long as you take care to disable the electric accumulator pump (you don't want to have the caliper pistons shoot out), and keep the hydraulic system closed (Bleeding requires special tools), the brakes are standard issue (but last about 200,000 miles!)
    • gas tank swap - here there are some differences
    • mufflers,
    • belts/tensioners - The serpentine belt is a relatively simple DIY, but the water pump (one of 4 coolant pumps) and the electric Inverter coolant pump require care to get the air out of their two independent cooling loops.
    • etc. - read the archives here and before you do anything, ask here or in the Yahoo Prius_Technical_Stuff group.
    Some things will be best left to someone with experience, training and specialized tools, but there is a lot that you can still do yourself.

    JeffD
     
    #3 jdenenberg, Apr 5, 2011
  4. tf4624

    tf4624 Active Member

    Joined:
    Dec 4, 2009
    526
    51
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    N/A
    its fun and you can do it, you know you can.. I like doing cause i rather not give the greedy shops my money if I don't have to
     
    #4 tf4624, Apr 7, 2011
  5. SageBrush

    SageBrush Senior Member

    Joined:
    Jun 4, 2008
    11,627
    2,530
    8
    Location:
    Southwest Colorado
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    fonze,
    You may be disappointed. Very little breaks in a Prius :)
    You may have to resign yourself to taking things apart and then putting them back together.
     
    #5 SageBrush, Apr 7, 2011
  6. Hal W

    Hal W New Member

    Joined:
    Sep 26, 2010
    872
    53
    0
    Location:
    Grand Forks,B.C. Canada
    Vehicle:
    2006 Prius
    Model:
    II
    jdenenberg- What do you mean by disable the electric accumulator pump? Is this something we should be doing? Hal
     
    #6 Hal W, Apr 7, 2011
  7. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,852
    1,847
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    When you have the calipers off an increase in brake pressure can eject the pistons. The ECU can cause the brake accumulator pump to run when you don't expect it. Disconnecting the 12v battery or removing the right fuse can prevent an expensive event (new calipers, Dealer brake bleed).

    JeffD
     
    #7 jdenenberg, Apr 7, 2011
    1 person likes this.
(You must log in or sign up to post here.)