1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Need a measurement for the hatch area of the V

Discussion in 'Prius v Main Forum' started by F8L, Nov 26, 2011.

  1. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Would someone be so kind as to measure the height from the rear deck to the roof for me?

    I would like to haul a small 50cc to 70 cc quad in the hatch area and think it may fit in the v. I could use this for my land management duties without having to buy a truck. :)
     
  2. Jwlongbd

    Jwlongbd Junior Member

    Joined:
    Nov 22, 2011
    2
    0
    0
    Location:
    So. Cal
    Vehicle:
    2012 Prius v wagon
    Model:
    N/A
    Mine measures 28 1/2" across the straight part, then tapers at the corners. Hope that helps.
     
  3. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Thanks! That really helps. :)
     
  4. Kathy Y

    Kathy Y New Member

    Joined:
    Nov 20, 2011
    1
    0
    0
    Location:
    Washington
    Vehicle:
    2012 Prius v wagon
    Model:
    II
    I got rid of the truck and SUV because the V has a large enough opening for me. inside dim 31" top tapers to 42" bottom then 28.5"-29" for roof to floor, been able to haul dishwasher, stove, dryer, or many rescue dog crates.
     
  5. cycledrum

    cycledrum PSOCSOASP

    Joined:
    Apr 9, 2008
    8,245
    1,202
    0
    Location:
    NorCal
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Interesting question because I brought a new dryer home in my pickup with shell yesterday. Box was 29 x 31 x 44" so it would have been a little big. Guess that's one slight advantage the cute ute Rav / CR-Vs have is they are a little taller. If they can bring the load floor down a couple inches in next rev, that might be good, or not.
     
  6. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I measured my Genii and it was 25.5" at the middle. This would be the tallest the quad could be and still fit. Removing the tires would allow a 30" quad to fit. Unfortunately I couldn't find any that were smaller and still useful. The ones I found would fit in a v, however. :)