1. Attachments are working again! Check out this thread for more details and to report any other bugs.

TPMS

Discussion in 'Prius c Accessories and Modifications' started by krneidigh, Sep 6, 2012.

  1. krneidigh

    krneidigh Junior Member

    Joined:
    Mar 18, 2012
    70
    17
    0
    Location:
    Pensacola
    Vehicle:
    2012 Prius c
    Model:
    Three
    I am getting new wheels and transferring over tpms and rubber. The guy the shop said they could do it, but they don't have the tool required to reset the TPMS. What does this mean? Do they have to be reset if they are ones currently on the car?
     
    #1 krneidigh, Sep 6, 2012
  2. RobH

    RobH Senior Member

    Joined:
    Sep 18, 2006
    2,369
    979
    70
    Location:
    Sunnyvale, California
    Vehicle:
    2006 Prius
    If they're transferring the sensors in the wheels, then no reset is required. If you change the tire pressures, then it would be appropriate to press the TPMS reset button under the dash. The fancy tool is only required to register different tire sensors.
     
    #2 RobH, Sep 7, 2012
  3. krneidigh

    krneidigh Junior Member

    Joined:
    Mar 18, 2012
    70
    17
    0
    Location:
    Pensacola
    Vehicle:
    2012 Prius c
    Model:
    Three
    Cool, thanks.
     
    #3 krneidigh, Sep 7, 2012
  4. krneidigh

    krneidigh Junior Member

    Joined:
    Mar 18, 2012
    70
    17
    0
    Location:
    Pensacola
    Vehicle:
    2012 Prius c
    Model:
    Three
    Are they programmed in position; driver front cant be installed in passenger rear? Or just as long as the sensor is on car, with the right pressure, the car doesn't care?
     
    #4 krneidigh, Sep 7, 2012
  5. dellrio

    dellrio Im pretty much awesome

    Joined:
    May 30, 2010
    281
    88
    37
    Location:
    Des Moines, IA
    Vehicle:
    2012 Prius c
    Model:
    Three
    placement does not matter - you should rotate the tires every 5,000 miles and resetting the TPMS would be impractical every 5K.
     
    #5 dellrio, Sep 7, 2012
  6. krneidigh

    krneidigh Junior Member

    Joined:
    Mar 18, 2012
    70
    17
    0
    Location:
    Pensacola
    Vehicle:
    2012 Prius c
    Model:
    Three
    Thanks for all the help. I just throw some wheels on this afternoon.

    MAXXIM WHEELS - MAZE 15"x6.5" offset 38mm 12.87lbs each.
     

    Attached Files:

    #6 krneidigh, Sep 7, 2012
  7. FastZX6R

    FastZX6R Junior Member

    Joined:
    Sep 12, 2012
    80
    16
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    Nice wheels.

    What do you guys do with the extra holes in the wheels?? I have Black Drag Wheels and they also have extra holes. Would be nice to cover them up somehow.
     
    #7 FastZX6R, Sep 15, 2012
  8. shuiwm

    shuiwm Junior Member

    Joined:
    Nov 11, 2012
    14
    2
    0
    Location:
    New York, NY
    Vehicle:
    2012 Prius c
    Model:
    Four
    are there any issue for the TPMS, is the sensor easy to remove & install?, thanks
     
    #8 shuiwm, Nov 11, 2012
  9. krneidigh

    krneidigh Junior Member

    Joined:
    Mar 18, 2012
    70
    17
    0
    Location:
    Pensacola
    Vehicle:
    2012 Prius c
    Model:
    Three
    It's been 5k miles everything has been fine. I've seen pictures of them I honestly cant imagine they are difficult to swap them, but replacing them requires reprogramming and some shops carry the tool for that.
     
    #9 krneidigh, Nov 21, 2012
(You must log in or sign up to post here.)