1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gas Engine Starter Motor

Discussion in 'Gen 2 Prius Technical Discussion' started by Walker1, Apr 16, 2007.

  1. Walker1

    Walker1 Empire

    Joined:
    Jan 13, 2006
    911
    6
    0
    Location:
    FL
    Vehicle:
    2014 Prius
    Model:
    Two
    I was wondering what starts the gas engine. I never hear anything like on a regular engine. Just curious to know how it works. Thanks.
     
  2. JimboK

    JimboK One owner, low mileage

    Joined:
    May 1, 2006
    2,817
    186
    49
    Location:
    Chesterfield, VA
    Vehicle:
    2005 Prius
    The Prius has two motor/generators, called MG1 and MG2. When you first power up the car, MG1 starts turning and begins spinning the engine. When engine RPM and oil pressure reach acceptable levels, the engine lights, generally several seconds after startup.

    One of the best places to read about how the car works is on the site of one of PC's members, john1701a.
     
  3. Sho-Bud

    Sho-Bud Member

    Joined:
    Jan 5, 2006
    190
    0
    0
    Location:
    Amsterdam, Netherlands
    Vehicle:
    2006 Prius
    <div class='quotetop'>QUOTE(Walker1 @ Apr 16 2007, 03:06 PM) [snapback]423945[/snapback]</div>
    It's done by the generator, the engine opens its valves, so there's no compression/resistance, than the generator spins the engine to about 1000 rpm, valves are closed, then ignition. (hope I have it all correct)
     
  4. KMO

    KMO Senior Member

    Joined:
    Apr 15, 2004
    1,369
    318
    0
    Location:
    Finland
    Vehicle:
    2023 Prius Prime
    Model:
    N/A
    Close - the Prius engine isn't sophisticated enough to totally open its valves; it can only change the timing of the intake valve (and not its open period), so the best it can do is adjust its timing to minimise compression and resistance as much as it can.
     
  5. ekpolk

    ekpolk What could possibly...

    Joined:
    Jul 31, 2006
    548
    176
    0
    Location:
    Pensacola & Vero Beach FL
    Vehicle:
    2018 Prius
    Model:
    Two Eco
    Well, I'd only add that "isn't sophisticated enough" really isn't a fair characterization, especially in light of all the other tricks this car plays (especially using it's intake valves radical timing adjustment range to, in effect, vary the engine's displacement -- a/k/a Atkinson cycle). Additionally car maker research has indicated that the most efficient way to "cut" cylinders temporarily generally involves leaving the valves closed. The trapped air that is compressed acts as a spring, returning almost all of the compression energy on the piston's downstroke, making the "dead" compression and "power" strokes pretty much an energy wash. By contrast, if the valves were to be "popped" open while the cylinder was unused, the engine would still be expending energy moving air through -- air that unlike when used in combustion, is now contributing nothing but more drag.

    As a side note, those monstrously noisy "Jake Brakes" on the big rigs take advantage of this principle. When you hear that incredible "bwaaaaa" sound from a Jake Braked truck, what's happening is the system allows the dead cylinders (in this case all of them) to compress an intake charge (big energy, remember diesels have huge compression ratios compared to gas engines). Then, when the engine has spent all that energy compressing the air, the Jake Brake opens the exhaust valve, allowing the compressed air to explode from the cylinder (hence the awful noise), and not allowing the "springback" effect that would neutralize the net energy. This gives heavy trucks tremendous extra braking power, without the risk of overheating friction brake components.

    But back on point, yes, the Prius uses the smaller of its two Motor-Generators (MG1) as the starter for the ICE. The 1NZ-FXE therefore has no "starter motor" in the sense that a traditional gas or diesel car does.
     
    SteveWlf likes this.
  6. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,045
    15,358
    0
    Location:
    Huntsville AL
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Certainly MG1 provides the ICE starting torque but not as well known, MG2 also provides a little bit of 'counter torque' to hold the ring gear stationary. This minimizes the stress on the parking paw. It is a minor detail.

    Bob Wilson
     
  7. Marc Thibeault

    Marc Thibeault New Member

    Joined:
    Jan 25, 2013
    1
    0
    0
    Vehicle:
    2012 Prius
    Model:
    N/A
    If I understand correctly, the gas engine is started by the generator. And I imagine that the generator is powered by batteries (550 volts) and not the 12 volt battery?
     
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,533
    48,842
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    correct.
     
  9. SteveLee

    SteveLee Active Member

    Joined:
    Sep 15, 2012
    645
    179
    0
    Location:
    North Carolina
    Vehicle:
    2010 Prius
    Model:
    I
    The 2Gen and later HV battery is 201V I believe.
     
  10. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,910
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    The battery voltage is nominally 201.6 volts, made up by 168x 1.2 volt cells. This voltage varies though as the battery state of charge does. I do not know the minimum and maximum figures but it could rise to around 240volts.

    John (Britprius)
     
  11. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,198
    6,461
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    MG1 is powered by the inverter. The inverter is powered by the high voltage traction battery.

    While converting to DC to AC, the inverter also increases the voltage from 201VDC nominal to three-phase ~500VAC.
     
    hsnmz and SteveLee like this.
  12. techntrek

    techntrek Member

    Joined:
    Nov 6, 2012
    263
    84
    0
    Location:
    MD
    Vehicle:
    2008 Prius
    Model:
    Three
    200-244 volts, with a brief drop to 190 when the engine starts.
     
  13. SteveLee

    SteveLee Active Member

    Joined:
    Sep 15, 2012
    645
    179
    0
    Location:
    North Carolina
    Vehicle:
    2010 Prius
    Model:
    I
    As usual Patrick, your post here puts a finer point to the issue, while I am still only able to paint the picture of most Prius issues with a broader brush. Your more detailed information is greatly appreciated and very helpful in coming to a better understanding of our fine cars. Thanks.
     
  14. maestro8

    maestro8 Nouveau Member

    Joined:
    Feb 19, 2012
    471
    109
    0
    Location:
    nor cal
    Vehicle:
    2008 Prius
    Model:
    N/A
    If you think of batteries only in terms of voltage then they're going to do mysterious things like this... and you'll be left wondering why and what and how.

    But if you learn about Thevenin's theorem, then it will all become crystal clear, and one can calculate these minimums and maximums and even determine SOC with simple arithmetic.

    Thévenin's theorem - Wikipedia, the free encyclopedia

    Think of the battery having an internal resistor, whose resistance changes with SOC. All of a sudden, the fact that the voltage drops when the ICE is started... makes sense!

    I'll leave the rest of the lesson to you as homework. :)
     
  15. techntrek

    techntrek Member

    Joined:
    Nov 6, 2012
    263
    84
    0
    Location:
    MD
    Vehicle:
    2008 Prius
    Model:
    Three
    No reason to do any calculations, I posted the numbers I've actually measured 3 posts above (see my sig link for more info).
     
  16. maestro8

    maestro8 Nouveau Member

    Joined:
    Feb 19, 2012
    471
    109
    0
    Location:
    nor cal
    Vehicle:
    2008 Prius
    Model:
    N/A
    Sorry if I'm not being clear, but my point was thus: there's no reason to measure several voltages if you have the internal resistance as a function of SOC.

    If all you think about is voltage, then the battery will be a mystery box that spits out various numbers at various times. If you follow Thevenin's theorem, you'll be able to anticipate (to first order) what the battery will do under various conditions. Hence, a Thevenin equivalent model is much more valuable than a few measurements.
     
  17. techntrek

    techntrek Member

    Joined:
    Nov 6, 2012
    263
    84
    0
    Location:
    MD
    Vehicle:
    2008 Prius
    Model:
    Three
    Not for most people, sorry if I wasn't clear about that. For most people they just need to know the voltages which can very easily be measured.
     
    Britprius likes this.
  18. PriusGuy32

    PriusGuy32 Prius Driver Extraordinaire

    Joined:
    Sep 10, 2012
    1,411
    506
    0
    Location:
    Harrison Township, Michigan
    Vehicle:
    2015 Prius
    Model:
    Four
    Interesting!!! Is this why sometimes when my ICE starts, the car seems to want to lunge forward?
     
  19. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,910
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    Yes MG1 in trying to turn the engine some of the energy tries to go through the power split device to turn the wheels and MG2 but the parking pawl stops this.

    John (Britprius)
     
  20. GrumpyCabbie

    GrumpyCabbie Senior Member

    Joined:
    Dec 14, 2009
    6,722
    2,120
    45
    Location:
    North Yorkshire, UK
    Vehicle:
    2010 Prius
    Model:
    III
    I guess this is why when half my inverter fried, the car would move forward slowly on electric but the engine wouldn't fire up, nor was regen braking working.