1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rear hatch Stays gone bad

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by suzieyoga, Jan 27, 2013.

  1. suzieyoga

    suzieyoga Junior Member

    Joined:
    Jul 11, 2005
    7
    0
    0
    My rear hatch is difficult to lift and close. When new it would rise easily and close the same. The dealer service says I need 2 new hatch stays. Over $500+. Any suggestions?
     
    #1 suzieyoga, Jan 27, 2013
  2. xs650

    xs650 Senior Member

    Joined:
    Jul 2, 2010
    4,539
    1,433
    9
    Location:
    Northern California
    Vehicle:
    2010 Prius
    Model:
    II
    Try your local car parts store instead of the dealer. should be under $100 for parts and it's a DIY job.
     
    #2 xs650, Jan 27, 2013
    dogfriend likes this.
  3. dogfriend

    dogfriend Human - Animal Hybrid

    Joined:
    Feb 26, 2007
    7,512
    1,185
    0
    Location:
    Carmichael, CA
    Vehicle:
    2007 Prius
    Yes, the gas springs (those black cylinders on each side attached to hatch and body) lose pressure over time. Mine are beginning to get weak in cold weather after 6 years. They shouldn't be difficult to replace, $500 is way too much. I agree, less than $100 for parts.
     
    #3 dogfriend, Jan 27, 2013
  4. Norie

    Norie New Member

    Joined:
    Dec 15, 2012
    14
    0
    0
    Vehicle:
    2008 Prius
    Model:
    II
    I've just ordered a rare bumper protector & shark antena for my '08 Prius from this site. Hope they're easy forme to DIY...
     
    #4 Norie, Jan 27, 2013
  5. northwichita

    northwichita .

    Joined:
    Sep 24, 2006
    481
    102
    29
    Location:
    Wichita KS
    Vehicle:
    2004 Prius
    #5 northwichita, Jan 27, 2013
    dogfriend likes this.
  6. dorunron

    dorunron Senior Member

    Joined:
    Jul 17, 2011
    3,318
    1,103
    0
    Location:
    Houston, TX
    Vehicle:
    2013 Prius
    Model:
    Three
    I haven't done the job, but it looks pretty simple. Read the instructions in the link above and watch this video. It looks like the trick is getting the clips off. If you look closely at the struts, you should be able to see the clips plainly. Yeah, I know the video is for a Acura Hood Lift, but the principles and procedures are very similar. The main thing is the clips.



    Hope this helps!

    Ron
     
    #6 dorunron, Jan 27, 2013
  7. unmesh59

    unmesh59 Junior Member

    Joined:
    Jul 22, 2010
    49
    9
    0
    Location:
    SF Bay Area
    Vehicle:
    2016 Prius
    Model:
    Two
    I'm happy with the OEM Stabilus SG329019 struts that I got for $59 on Ebay
     
    #7 unmesh59, Jan 30, 2013
    PriusGuy32 likes this.
(You must log in or sign up to post here.)