1. Attachments are working again! Check out this thread for more details and to report any other bugs.

DRL's went out.. Help!

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Tshah, Mar 16, 2013.

Page 1 of 2
  1. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    So I upgraded my interior lights, parking lights and license plate lights to LED. I blew the fuse on that so I changed it to a higher wattage fuse and works great.

    However I know noticed that my DRL's aren't working. I've checked the fuse and cannot figure it out.. Can anyone help???
     
    #1 Tshah, Mar 16, 2013
  2. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    I know this is a stupid question but is your car in "ready" mode and the switch in the drl position?
     
    #2 Kore971, Mar 16, 2013
  3. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    Yes.. Ive also switched modes and still nothing.
     
    #3 Tshah, Mar 16, 2013
  4. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    What do you mean by switched modes?
     
    #4 Kore971, Mar 16, 2013
  5. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    Sorry... I normally have the lights on DRL.. and i went from that to Drl with parking lights and then to headlights.. switching back and forth..
     
    #5 Tshah, Mar 16, 2013
  6. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    Ok and is your e-brake released?
     
    #6 Kore971, Mar 16, 2013
  7. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    ya.. e-brakes released
     
    #7 Tshah, Mar 16, 2013
  8. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    Hmm ok which fuse blew and which fuses have you checked?
     
    #8 Kore971, Mar 16, 2013
  9. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    fuse 34 blew and killed the interior lights. thats been fixed. nd ive checked fuse 24and 25 both look fine.
     
    #9 Tshah, Mar 16, 2013
  10. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    Is fuse 24 or 25 related to the drl system?
     
    #10 Kore971, Mar 16, 2013
  11. cwerdna

    cwerdna Senior Member

    Joined:
    Sep 4, 2005
    12,544
    2,123
    1
    Location:
    SF Bay Area, CA
    Vehicle:
    2006 Prius
    The above sounds like a bad idea. The selection of fuses and their ratings for each circuit was picked for a reason and not out of a hat. Going beyond the original rating increases the possibility of wiring overheating or a fire.

    I'd switch back to a fuse w/no higher amperage rating than the original.
     
    #11 cwerdna, Mar 16, 2013
    Tracksyde, sfv41901 and fuzzy1 like this.
  12. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    yes..

    24 - Headlight high beams, day time running lights and 25 DRL
     
    #12 Tshah, Mar 16, 2013
  13. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    I agree...
     
    #13 Kore971, Mar 16, 2013
  14. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    Thanks for the heads up... I placed it with the same fuse now.
     
    #14 Tshah, Mar 16, 2013
  15. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    Ok just to reiterate, the car must be in ready mode (ready to drive) mode in order for the drls to come on, not in 'on' state.., because they will not light up even if the ignition is just turned on...
     
    #15 Kore971, Mar 16, 2013
  16. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    If you are sure that the car is started and all the fuses are good there is no reason it shouldn't be working...
     
    #16 Kore971, Mar 16, 2013
  17. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    Drls are back and working fine.. Once I replaced the fuse to the correct wattage they started working again. But now the radio is out. *(&(*&^UIHSDHFIU
     
    #17 Tshah, Mar 17, 2013
  18. Kore971

    Kore971 PEDD-CESC

    Joined:
    Nov 17, 2009
    106
    58
    6
    Location:
    Downey
    Vehicle:
    2011 Prius
    Model:
    Five
    :unsure:
     
    #18 Kore971, Mar 17, 2013
  19. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,323
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    In addition to the already mentioned concern that this is a bad idea for the wiring, LEDs should be pulling less current than any incandescent lamps they replaced, so they should not be needing a larger fuse.

    ... unless you selected far brighter LEDs.
     
    #19 fuzzy1, Mar 17, 2013
  20. Tshah

    Tshah New Member

    Joined:
    Feb 22, 2013
    13
    0
    0
    Vehicle:
    2013 Prius
    Model:
    II
    I'm going to remove everything tomorrow in hopes that it restores everything.
     
    #20 Tshah, Mar 17, 2013
(You must log in or sign up to post here.)
Page 1 of 2