1. Attachments are working again! Check out this thread for more details and to report any other bugs.

anyone used cd slot phone mount on their prius?

Discussion in 'Gen 3 Prius Audio and Electronics' started by xcuter, Apr 29, 2013.

  1. xcuter

    xcuter Active Member

    Joined:
    Apr 27, 2013
    303
    182
    0
    Vehicle:
    2010 Prius
    Model:
    III
  2. Chaloney

    Chaloney Junior Member

    Joined:
    Apr 13, 2013
    41
    9
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    I have one of these. Works well. Used it for a couple years in my old car but the CD player was already broken. Haven't tried a cd in my prius--actually can't remember the last time I listened to a cd in my car...with my phone, pandora, and xm it hasn't been needed.
     
  3. xcuter

    xcuter Active Member

    Joined:
    Apr 27, 2013
    303
    182
    0
    Vehicle:
    2010 Prius
    Model:
    III
    great I ordered it! I choose this one because I like the location the phone will be in for navi and it will hopefully not obstruct the vents.
     
  4. Chaloney

    Chaloney Junior Member

    Joined:
    Apr 13, 2013
    41
    9
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    It blocks the vents partially but it depends mostly on how your phone is clamped in it (which depends on button location) and which way it is oriented. It does not block either vent completely, and at this time of year it get quite hot in the afternoons in Florida and I have not had any problems with inadequate airflow from the vent
     
  5. ewxlt66

    ewxlt66 Active Member

    Joined:
    May 1, 2008
    535
    186
    0
    Location:
    Dana Point, CA
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Who will post a pic of their set up?
     
  6. Jamesb93612

    Jamesb93612 Member

    Joined:
    Mar 19, 2013
    133
    69
    0
    Location:
    Clovis, Ca
    Vehicle:
    2008 Prius
    Model:
    N/A
    I just got one for my Gen2. I love it! My only gripe is that it can get tricky if you need to remove it. Just take your time and it will come out without breaking anything.


    iPad ? HD
     

    Attached Files:

    Jeannine143 and ewxlt66 like this.
  7. ewxlt66

    ewxlt66 Active Member

    Joined:
    May 1, 2008
    535
    186
    0
    Location:
    Dana Point, CA
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Thx James!!
     
  8. came_to_party

    came_to_party Junior Member

    Joined:
    Jun 3, 2013
    48
    10
    0
    Vehicle:
    2013 Prius
    Model:
    Four
  9. tomstodola

    tomstodola Member

    Joined:
    Jan 6, 2011
    129
    20
    0
    Location:
    Ontario, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    I have a cell phone mount from proclip. My phone mounts next the cupholder. I tapped into the aux plug for charging power when the phone is in the mount.
     
  10. Jesse Melara

    Jesse Melara Junior Member

    Joined:
    Aug 3, 2013
    39
    5
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    Two
    How did it come out? I want to order one but am worried it blocks the vents...how did yours come out??
     
  11. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    I don't know about the regular Gen III Prius, but the Prius"v" has this useless "card slot" for business cards that could have been much better used for a cup holder.

    An "L" shaped piece of aluminum with a cheap phone mount would be nice there, but you'd have to train you left hand.

    Just a thought.
     
  12. xcuter

    xcuter Active Member

    Joined:
    Apr 27, 2013
    303
    182
    0
    Vehicle:
    2010 Prius
    Model:
    III
    It worked out well.
     
  13. lichenpan

    lichenpan Junior Member

    Joined:
    Jul 7, 2014
    3
    0
    0
    Location:
    Chino Hills, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Have you guys tried Steelie mount? It works really well. I use it to mount my phone right in front of steering wheel.
     
  14. robertk328

    robertk328 Member

    Joined:
    Jul 13, 2010
    206
    36
    0
    Location:
    Northern Virginia
    Vehicle:
    2014 Prius
    Model:
    Three
    Looks cool - but not sure about having the piece stuck to the back of the phone like that :)
     
  15. ratedK

    ratedK Junior Member

    Joined:
    Jun 29, 2014
    9
    17
    0
    Location:
    Indianapolis, Indiana
    Vehicle:
    2010 Prius
    Model:
    III
    I found this simple IdeaWorks phone/gps mount at Frys Electronics for <$10. Looks like it's available on ebay & newegg also. Lets me put it right where I want it on top of the steering column within reach. Doesn't effect the tilt/telescope of the steering wheel. Looks like it would work well on the dash too.

    Works great with my S4, and running a wire to it was a breeze down to the plug under the center console. I also just transplanted my Escort Smart Radar display from my previous vehicle - mounted just to the right of the phone, along with a Bluetooth ODBII module that shows RPMs/battery temps/Reverse Beep/Instant mileage on the phone with the Torque App.

    Ideaworks JB7050 video review:

    Pictures of ratedK's phone mount: Prius Photos by ratedk | Photobucket
    DSCN0663.JPG 2014-07-21 07.41.59.jpg 20140720_134224.jpg DSCN0657.JPG DSCN0658.JPG DSCN0659.JPG
     

    Attached Files:

    KananDume likes this.
  16. James4455

    James4455 Junior Member

    Joined:
    Nov 2, 2013
    72
    21
    0
    Location:
    San Angelo, TX
    Vehicle:
    2013 Prius
    Model:
    Two
    I have a cd slot magnetic mount for my Samsung Galaxy Note 3. Overall I would rate it about a 8. Downsides are that the Note 3 is just a little heavy for the magnet and will let it slide over moderately rough roads. I don't think this would be a problem with lighter phones. Also, the setup obstructs the ac grill somewhat and the head unit slightly. Still, I'm happy with it. And no it doesn't harm the cd player.
     
  17. Liquidsilver

    Liquidsilver Junior Member

    Joined:
    Jun 6, 2015
    5
    1
    5
    Location:
    West Palm Beach, FL
    Vehicle:
    2014 Prius
    Model:
    Three
    This thread was handy when I was looking for a mount, so thought I would add my opinions. I purchased the "TechMatte MagGrip CD Slot Magnetic Universal Car Mount Holder" from Amazon for $10.99

    It fits well into the CD slot once tightened down. I used both styles of plate, the one that fit between the phone and case, as well as the adhesive style. Neither phone slips once put in place. One things to note, the magnetic is so strong it can adjust the angle of the magnetic holder when you are removing the phone from the mount. I got in the habit of pulling the phone downwards where the motion bottoms out, and it has prevented this issue further.

    The thing most people complain about is the thumb screw on the bottom of the mount blocking the dash. And of course, it is a problem with the LCD screen on the Gen 3 Prius. But a $1 bolt from a hardware store can solve this. Get either a M5x20, or a 10-32 x 1 and it should fix the problem. If you have a hacksaw you can fine tune the length of the bolt even more. The mount will not be as quick to remove, but I never foresee a need to remove it as this point.

    The is the mount with the factory thumb screw blocking the LCD. It was annoying with NAV because it does a great job of blocking the upcoming street names.
    IMG_20150924_074823631.jpg

    This is the mount with the new $1 bolt. The bolt is now short enough to not block the screen. It still has about two threads showing, and I may shorten it a little with a hacksaw when I have some free time.
    IMG_20150925_115857728.jpg

    All in all I would recommend this mount WITH the bolt replacement.
     
  18. caymandiver75

    caymandiver75 Member

    Joined:
    Jan 5, 2011
    191
    97
    0
    Location:
    Northern VA
    Vehicle:
    2019 Prius Prime
    Model:
    Plug-in Advanced
    I use the Keno air frame and love it!

    image.jpeg image.jpeg
     
    Redbot likes this.
  19. Lilpig

    Lilpig Junior Member

    Joined:
    May 13, 2015
    16
    9
    2
    Location:
    new york, ny
    Vehicle:
    2014 Prius Plug-in
    Model:
    Plug-in Base
    I tried and returned the CD mounts, I ended up going with shifter mount holder called the Nimbus Mount. I got it from amazon
     

    Attached Files:

  20. Jeannine143

    Jeannine143 New Member

    Joined:
    Dec 19, 2019
    1
    0
    0
    Location:
    NY
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Does anyone know if you have to remove the CD’s before inserting the phone holder? Also I wonder if you can play the discs while it’s inserted?

    I found one on Amazon that I’ll probably get Not sure for Prius. I’ll share the pic for whoever is looking for ideas.
     

    Attached Files: