1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Charging Cable Kinks

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by Jeffrey Perlman, Jun 20, 2013.

  1. Jeffrey Perlman

    Jeffrey Perlman Junior Member

    Joined:
    Jun 20, 2013
    4
    2
    0
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    How do I straighten out a charging cable that kinks? How do I prevent it from kinking again?
     
  2. -1-

    -1- Don

    Joined:
    Jan 16, 2013
    1,247
    434
    8
    Location:
    Chester, Virginia
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    :confused:Which charging cable are you referring to? The factory EVSE that came with your plug in? Mine is very flexible, might tangle, but not kink. My Leviton Level 2 cable (10 gauge wire) is so thick, I doubt I could tie it in a knot.
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,693
    49,393
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i think you just have to be more careful. what situation is it kinking in? are you in a cold climate? lay it in the hot sun for the day and try to unkink it by bending the kink in the opposite direction. when coiling and un coiling, make sure you're twisting the cable everytime you make a loop, or untwisting it when uncoiling. there is a thread here with video showing how to properly coil an electrical cable.
     
  4. Norman Jensen

    Norman Jensen Junior Member

    Joined:
    Nov 30, 2012
    8
    0
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I have the same problem. I am trying the lay it out in the sun solution. I have layed it out before and untwisted it only to have the problem return. I don't think I am twisting every time plug or unplug it. I am in CA and car is in the garage. Cold temperature is not the problem.
     
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,693
    49,393
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it won't kink if you rotate the cable as you loop it onto the hanger, and unrotate it as you take it off. (y) as for unkinking, i can't think of anything except bending the kinks the other way.