1. Attachments are working again! Check out this thread for more details and to report any other bugs.

tail light plasti dip ......???!!!!

Discussion in 'Prius c Accessories and Modifications' started by Billy joe, Oct 6, 2013.

  1. Billy joe

    Billy joe New Member

    Joined:
    Sep 15, 2013
    27
    5
    0
    Location:
    Pittsburg California
    Vehicle:
    2013 Prius c
    Model:
    Four
    so i ordered the tail light tint kit from juiced hybrid only to find out its a 3 foot roll of tint (60$) ... auto zone carry's same thing prices from 12 to 30 .. if i have someone tint with the kit i got im looking at 50, 60 for install plus 60 so 110 or 120 might as well get a lower brace. or i wanted to try and get them tinted after taking the kit back see if they will do it for 60 and they include tint, but then began to think about the sticky residue it leaves if you tried pilling off.

    so today i platidipped my tail lights (smoke) i was thinking black but then again trouble with the law i dont really need. so the smoke gives it the not so chrome look but not to dark to get a ticket either lmk what yall think i dipped both sides but decided to pill off one side so i can get opinions at both looks. it took me about 1 1/2 hours to finish and was very happy i like the smoke look but also the reg look is okay with me to .... left side is plasti dipped smoked right side i cleared to give everyone an example.

    this time im asking opinions on the tail light tint. maybe i should of went all black, maybe i should have done same color as my logos and wheels, maybe i should just go pay someone to tint with the kit i already baught. opinions and please post your experiences thank you guys. CAM01496.jpg CAM01502.jpg

    CAM01501.jpg
     
  2. JoeS

    JoeS Member

    Joined:
    Jun 5, 2013
    77
    27
    0
    Location:
    LA / Bay Area
    Vehicle:
    2013 Prius
    Model:
    Two
    Any shots from the back so we can see both at the same time?
     
  3. Billy joe

    Billy joe New Member

    Joined:
    Sep 15, 2013
    27
    5
    0
    Location:
    Pittsburg California
    Vehicle:
    2013 Prius c
    Model:
    Four
    ill do that right now (y)

    image.jpg
     
  4. Billy joe

    Billy joe New Member

    Joined:
    Sep 15, 2013
    27
    5
    0
    Location:
    Pittsburg California
    Vehicle:
    2013 Prius c
    Model:
    Four
  5. Daniel Moore

    Daniel Moore Junior Member

    Joined:
    Jun 20, 2013
    29
    10
    0
    Location:
    Cramerton NC
    Vehicle:
    2013 Prius c
    Model:
    Two
    Mark323 likes this.
  6. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    just looks old and weathered down to me. not a fan.
     
    Mark323 likes this.
  7. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,842
    3,099
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    It would look much better, IMO if you had taken the tail lights apart and PlastiDipped the chrome finished areas instead of the lenses.

    SCH-I535 now Free
     
  8. Billy joe

    Billy joe New Member

    Joined:
    Sep 15, 2013
    27
    5
    0
    Location:
    Pittsburg California
    Vehicle:
    2013 Prius c
    Model:
    Four
    Finally an opinion i can work with hahaha i was wondering how to do that but if i did that I would dip it black or same color i did wheels and logos. If you know a thread on that lmk i seen something like that on heads but had problem fogging after they were done
     
    Dylan Doxey likes this.
  9. JoeS

    JoeS Member

    Joined:
    Jun 5, 2013
    77
    27
    0
    Location:
    LA / Bay Area
    Vehicle:
    2013 Prius
    Model:
    Two
    I think u should get them tinted with %50 tint. To me the dark tinted tails are dangerous and attract unwanted attention. But %50 seems to take the edge off and help blend them into the car.
     
  10. B2FiNiTY

    B2FiNiTY Active Member

    Joined:
    Dec 17, 2012
    979
    226
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    looks odd...
     
  11. Braddles.au

    Braddles.au DEFAnitely using an EBH

    Joined:
    Jan 25, 2012
    295
    99
    1
    Location:
    Canberra, Australia
    Vehicle:
    2010 Prius
    Model:
    N/A
    Respray that side of the car matt black and then let's see.
    But seriously, I don't think that the effect quite works.
     
  12. Billy joe

    Billy joe New Member

    Joined:
    Sep 15, 2013
    27
    5
    0
    Location:
    Pittsburg California
    Vehicle:
    2013 Prius c
    Model:
    Four
    So i should tint them with the kit i have or see if they will do it with the tint for for the same price as i got the kit for?? Or dip them black and smoke to give it more a darker tint ... Only worrys is a fix it ticket pellin off tint with sticky residues .
     
  13. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,149
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    Try another layer of smoke first... just doesn't look applied. I thought you had sanded the lens and was looking for the next picture.
     
  14. Billy joe

    Billy joe New Member

    Joined:
    Sep 15, 2013
    27
    5
    0
    Location:
    Pittsburg California
    Vehicle:
    2013 Prius c
    Model:
    Four
    You might be right i only applied 3 coats and no clear im thinkin of maybe trying it again as another weekend im free .. Apply 5 coats and 2 coats clear ... No sandin down for plasti dip sticks to alot of stuff even primer just doesnt peel off the best tho
     
  15. yOsHi LiN

    yOsHi LiN Active Member

    Joined:
    May 12, 2014
    215
    137
    0
    Location:
    los angeles
    Vehicle:
    2014 Prius c
    Model:
    Four
    I did 7 coat of smoke and 7 gloss and this how it look !!
     

    Attached Files: