1. Attachments are working again! Check out this thread for more details and to report any other bugs.

For Sale gen2 complete 10kwh Plug In Conversion

Discussion in 'Private Sales' started by 3prongpaul, Oct 10, 2013.

  1. 3prongpaul

    3prongpaul Hybrid Shop Owner, worked on 100's of Prius's

    Joined:
    Jul 18, 2010
    954
    720
    1
    Location:
    Boulder Hybids, Boulder, CO
    Vehicle:
    2006 Prius
    Model:
    N/A
    I'm posting this on behalf of a customer of Boulder Hybrids. He had a 10kwh plug in conversion installed in his 07 Prius. The car got totaled because of a front end accident. We pulled out the PHEV equipment which was undamaged.

    His new Prius is a Gen3 and this system won't work in Gen3.

    Most drivers will see 90-100mpg average with this system, depending on your driving patterns.

    Compatible with 2004-2009 Prius Only!
    10kwh battery pack with GBS cells, pre-wired
    Elithion Pro BMS upgraded to support GUI software
    Elcon Charger, bumper plug inlet
    control software (based on prior generation of Plug In Supply "contractor" method)
    upgraded rear struts (heavier coil springs to handle the extra weight of battery pack)
    hardware, cables etc.

    $5300. Located in Boulder CO. Can ship anywhere, shipping cost additional.
    Pmail or Call Paul at 303-325-7411 if you have any other questions.
     
    #1 3prongpaul, Oct 10, 2013
    dpluigi likes this.
  2. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    Interesting post
     
    #2 mrbigh, Oct 10, 2013
    NortTexSalv04Prius likes this.
  3. dpluigi

    dpluigi Junior Member

    Joined:
    Jul 23, 2013
    8
    1
    0
    Location:
    Denver CO
    Vehicle:
    2009 Prius
    Model:
    Five
    Hi Paul,

    How does this compare to your current 10KWh kit you sell and install, which based on the Orion BMS?

    Thanks,
    Donat
     
    #3 dpluigi, Oct 16, 2013
  4. 3prongpaul

    3prongpaul Hybrid Shop Owner, worked on 100's of Prius's

    Joined:
    Jul 18, 2010
    954
    720
    1
    Location:
    Boulder Hybids, Boulder, CO
    Vehicle:
    2006 Prius
    Model:
    N/A
    Our current product (using OrionBMS) REPLACES the Prius Hybrid battery and has much tighter integration with the Prius engine control. New product allows all EV well over 60 MPH with "engine on standby" feature...i.e. you punch the gas pedal and engine fires right up. The BMS and entire battery pack can be monitored with Torque on an Android device. Our current product is great if you have a high mileage Gen2 with a tired Hybrid battery since it gets replaced.

    The older Plug In Supply software used contactors (giant relays) to piggyback the Lithium battery onto the factory battery based on an algorithm. You could run all EV, but if you forced the car into EV the gas engine stayed off until you rebooted the car....not the safest way to drive a Prius. and top speed in EV mode was 52mph....and you needed a healthy Hybrid battery to use it.

    The OrionBMS is supported by a responsive engineering company that adds features and fixes bugs as needed.

    The Plug In Supply software has a few quirks but still works ok, just not nearly as nice as OrionBMS system. PIS software we have hasn't been changed for over 3 years and PIS refused to support or upgrade the units we purchased from them.
     
    #4 3prongpaul, Oct 16, 2013
  5. dpluigi

    dpluigi Junior Member

    Joined:
    Jul 23, 2013
    8
    1
    0
    Location:
    Denver CO
    Vehicle:
    2009 Prius
    Model:
    Five
    Thanks the clarification. Another thought, based on the advantage of the Orion BMS over PIS, would it be cost effective and advantageous to upgrade this used kit with the Orion BMS?

    Thinking along theline of using a balanced battery pack which benefit of the upgrade to reach safer highway speed. Of course, it does't cost much less than a new kit, then this would be a moot point.
     
    #5 dpluigi, Oct 16, 2013
  6. cd65000

    cd65000 Junior Member

    Joined:
    Sep 1, 2012
    2
    0
    0
    Vehicle:
    2010 Prius
    Model:
    II

    Still available? I am interested. When was it sold? How many cycles?
     
    #6 cd65000, Nov 27, 2013
  7. 3prongpaul

    3prongpaul Hybrid Shop Owner, worked on 100's of Prius's

    Joined:
    Jul 18, 2010
    954
    720
    1
    Location:
    Boulder Hybids, Boulder, CO
    Vehicle:
    2006 Prius
    Model:
    N/A
    As of today (11/27/13) the system is still available. We've had a few people interested, but nobody has given a deposit. There are approx 500 cycles on the pack. The batteries are from early 2012.
     
    #7 3prongpaul, Nov 27, 2013
  8. cd65000

    cd65000 Junior Member

    Joined:
    Sep 1, 2012
    2
    0
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Can I speak to a customer who has a similar system?
     
    #8 cd65000, Dec 8, 2013
  9. ron ron

    ron ron New Member

    Joined:
    Aug 20, 2019
    4
    0
    0
    Location:
    kelowna
    Vehicle:
    2006 Prius
    Model:
    II
    Crazy to ask after all this time but.......did you sell it?

    Thanks,

    Ron
     
    #9 ron ron, Oct 4, 2019
(You must log in or sign up to post here.)