1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Why will the car only staying neutral when I started the second time

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by swaco, Dec 20, 2013.

  1. swaco

    swaco Junior Member

    Joined:
    Sep 22, 2008
    17
    0
    0
    Location:
    spokane
    Vehicle:
    2008 Prius
    This was happening on my 2008 a couple of months ago and also now on my 2013 I noticed sometimes when I get in the car I push the button once and as usual then I have to push the button the second time and it only goes in neutral and assign comes up and says shift to park position starting so I don't get it this only happens once in a while. Then a couple times later or a couple days later as usual I pushed the button one and everything works fine right into the drive what gives?


    iPhone ? - now Free
     
  2. css28

    css28 Senior Member

    Joined:
    Feb 27, 2012
    1,566
    442
    3
    Location:
    Suburban Detroit
    Vehicle:
    2011 Prius
    Model:
    Three
    Does your car still have its original 12 V battery?
    People report strange behaviors from older 12 V batteries (and, at 5+ years old, yours would qualify as old).
     
  3. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,862
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    My first question is why would you ever want to be in Neutral? It can't charge in N, so the HV Battery is being run down. (which may be why it is going to Park)

    It is extremely rare that being in N is a good idea in a Prius. N is required by US Federal regulations, but is not very useful as a Neutral.
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,690
    49,387
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    are you pressing the brake hard enough? or possibly the brake interlock switch needs adjusting.
     
  5. swaco

    swaco Junior Member

    Joined:
    Sep 22, 2008
    17
    0
    0
    Location:
    spokane
    Vehicle:
    2008 Prius
    This is happened on my 2008 and every couple of days it happens on my 2013 so it's not the battery. Why would I want to be a neutral well I don't. When I get in the car her I push the button with my foot on the break and immediately move the joystick to drive and it will not go so I pushed the button again and turn the car off and do the process over again and on the second try it always works perfect put it in drive and I'm good to go. So I don't know why it's happening on both vehicles but who knows


    iPhone ? - now Free
     
  6. jdk2

    jdk2 Active Member

    Joined:
    Mar 6, 2010
    751
    219
    0
    Location:
    Raleigh, NC
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Advanced
    Perhaps it's just a timing issue. You're pushing the brake, then the power then jamming into drive. Try to give it a second between each step and see if that helps. IOW wait for the "Ready" light on the dash before shifting to "D".
     
  7. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,690
    49,387
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    well said. ^
     
  8. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    ++1
     
  9. Munpot42

    Munpot42 Senior Member

    Joined:
    Mar 12, 2012
    1,391
    543
    0
    Location:
    Santa Monica, Ca. 90405
    Vehicle:
    Other Hybrid
    You push the button then WAIT FOR THE READY LIGHT then put it into gear.