1. Attachments are working again! Check out this thread for more details and to report any other bugs.

what is our offset for flush wheels?

Discussion in 'Prius c Accessories and Modifications' started by KeepitSimple, May 29, 2014.

  1. KeepitSimple

    KeepitSimple Member

    Joined:
    Nov 14, 2013
    128
    4
    0
    Location:
    Washington, District of Columbia
    Vehicle:
    2012 Prius
    Model:
    Three
    I've searched and didnt come up with much. Looking for some offset numbers for the rear and front for the flush look or as close as possible.

    I was thinking either 15 or 16s.

    Also. Anyone recommend any springs for a basic drop?

    Thanks
     
    #1 KeepitSimple, May 29, 2014
  2. charlie madisson

    charlie madisson New Member

    Joined:
    May 29, 2014
    1
    0
    0
    Vehicle:
    2012 Prius c
    Model:
    Three
    Hello. I recently installed tenabe df210 lowering springs on my 2014 prius c. It's 1.5" drop. And also installed 1" wheel spacers. Looks great. Flush with wheel wells and not too much drop. Both can be purchased on ebay. I can post a pic later if you want. Let me know if you are interested in a megan racing exhaust system. I have for sale on ebay right now.
     
    #2 charlie madisson, May 29, 2014
  3. B2FiNiTY

    B2FiNiTY Active Member

    Joined:
    Dec 17, 2012
    979
    226
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    It also depends on the width you want to go with. With something like a 15x7, I'd recommend at least +35 if you want to get it flush. Or if you wanna go hella flush sTyLe yo! then go with something +30 or lower
     
    #3 B2FiNiTY, May 31, 2014
    KeepitSimple likes this.
  4. mertechperformance

    mertechperformance Active Member

    Joined:
    May 5, 2014
    532
    126
    0
    Location:
    Nor-caL
    Vehicle:
    2013 Prius c
    Model:
    Two
    Yeap, a major issue when ordering wheels. Unfortunately these cars aren't modded popularly enough to have an offset guide like say an xB, ef, eg, e30, mkIII, mkIV, ae86, FRS/BRZ/GT86, etc etc


    Also doesn't help that our rear wheels are very very tucked in compared to the front. Yet fronts are actually not TOO far from flush for stock and narrow. Aka x8.5 wide would probably be flush with 40 to 28 offset which is WAY high offset.
     
    #4 mertechperformance, May 31, 2014
(You must log in or sign up to post here.)