1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Plasti dip front bumper attempt...

Discussion in 'Prius c Accessories and Modifications' started by estebinbin, Jul 10, 2014.

  1. estebinbin

    estebinbin Member

    Joined:
    Aug 9, 2012
    184
    47
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    image.jpg image.jpg image.jpg
    This is my attempt to dip my front bumper on my prius c.. First off the color was not what I expected, I wanted the dark gun metal color. I was experimenting with a different brand other than plasti dip.. Second there was a heavy breeze and it didn't help my application, I dripped on one of the indent corners... And third, I guess I didn't remove the tape quick enough to create a clean line so I got some pull ups on it...
    All a learning experience... I just hate the idea of retaping everything when I am ready to try again...
     
    w2kpugsly likes this.
  2. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    i had similar problems with my project too, but i didnt face that drip problem, you might have been too close or left it at that stage for a loner time. i faced the tape problem, but as soon as i started pulling the tape, i grabbed a knife with a new blade so i wouldnt face ripping problems.

    what i learned is that, use tape, but take it off after every layer.

    the first layer of plastidip should be a very light misting.

    wait around 5-7 mins depending on the humidity level and then spray again, this time slightly heavier. and now remove the tape and reapply the tape.
    *tip, when first setting up the tape, apply "layers" of tape so that way when you remove on layer, the second layer is still in the same position

    after removing the tape, let it dry for another 5-7 mins and then spray again.

    do those steps one more time, for a total of 4 layers. i read that 4 layers were ideal for longevity.

    i used glossifer on my project. i let the plastidip layers dry for about 15-20 mins on the last coat.

    use tape again for the glossifer.

    spray the glossifer as evenly as possible.

    i used the same tips for spraying the dip for glossifer.

    first layer is very light and easy.

    second layer is more filling and even.

    third layer should cover all of the plastidip.

    the more layers of glossifer your do, the brighter it becomes. i did around 5 layers but i think i could have done like 2 more to get that real paint looking shine.

    also the best tip i can give is that make sure you do this project when your car isnt going to move for about 24hours and if parked outside, make sure the weather is clear. the dip dries easy but the glossifer takes a little longer.
     
  3. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,149
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    ^^^Holy crap, this! I hadn't thought of this. I had to re-tape the line every time and let me tell you that's not fun.
     
  4. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    another tip which really helps in that process is to put a piece of newspaper between each layer of tape. because without the newspaper, the blue tape will just pull the layer behind it.

    so when applying the layers of tape, add newspaper between the layers. it should help.
     
    ztanos and SwhitePC like this.
  5. SwhitePC

    SwhitePC Active Member

    Joined:
    Apr 11, 2013
    495
    214
    0
    Location:
    ca
    Vehicle:
    2013 Prius c
    Model:
    Four
    wow...my mind is blown...so simple yet I've never thought of it...now it makes it seem so much easier, I guess I'll plasti-dip my front too when I have time.
     
    koipond and ztanos like this.
  6. Mark323

    Mark323 Junior Member

    Joined:
    Mar 21, 2014
    69
    15
    0
    Vehicle:
    2013 Prius c
    Model:
    Four
    Sorry for your loss
     
  7. Gcoop

    Gcoop Member

    Joined:
    Jun 2, 2012
    156
    79
    0
    Location:
    niagara region ontario canada
    Vehicle:
    2012 Prius c
    Model:
    N/A
    tape once and spray the dip on in thin coats, getting a little thicker each time.

    after 6 or so coats
    do a thicker coat, and make sure you get along the tape edges.
    the plastidip causes a reaction where the dry dip underneath will reliquify when you spray another coat on top of it.

    so spray 6 or so coats, then when you do the final, little thicker coat, take the tape off within a minute or so and all will be fine.
    if you fel you have waited to long, spray on another coat, then remove tape