1. Attachments are working again! Check out this thread for more details and to report any other bugs.

After 1 year (JDM ZVW30 project)....

Discussion in 'Gen 3 Prius Accessories and Modifications' started by bino, May 16, 2011.

  1. Prius2010BLK

    Prius2010BLK New Member

    Joined:
    Oct 29, 2014
    14
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Four
    Hi Bino,

    Yes, I think I will go with the projector housing as well. But the problem is that I cannot find one that will fit on my Prius on eBay. Any help?

    Now, I already have a fog light on my 2010 Prius and I bought the H11 HID 3000k kit. When I look for projector housing on eBay, they only have ones that are universal and they are using H3 as the size of the light bulb. When I ask them if they will have a perfect fit fog light replacement unit, they told me that they are all universal and I have to do my own measurement. Does yours fits perfectly? If so, do you think they will have them on eBay?

    It will be nice if you can let me know.

    Thanks.

    Samuel
     
  2. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Hi Samuel,

    I'm not sure on the fog lights that are on ebay...... I got mine from Japan and I was trying to find the link for the seller but it seems there are no more postings for the lights that I got....... the fog lights I got fit perfectly because it was specifically for toyota cars with that kind of fog light housing....

    Bino
     
  3. Prius2010BLK

    Prius2010BLK New Member

    Joined:
    Oct 29, 2014
    14
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Four
    Hi Bino,

    Yes, most of the projector fog light housings are universal and for H3 light bulb. (which sucks!)

    Thanks again.

    Samuel
     
  4. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Hi Samuel...

    Did a search today...... and here you go...

    LUCE JAPAN企画 | カー用品の総合販売ストア
     
    #624 bino, Nov 14, 2014
    Last edited: Nov 14, 2014
    sfv41901 likes this.
  5. Prius2010BLK

    Prius2010BLK New Member

    Joined:
    Oct 29, 2014
    14
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Four
    Hi Bino,

    Thanks for providing the link again.

    Now, I have an issue with my 2010 Prius. After I installed the Front sway bar & Rear sway bar & Front camber bolt, my steering wheel shakes whenever I get up to 65mph+. Once I get up to 85mph+, the whole rear kind of vibrate. The noise is quite noticeable. Do you suggest me to get the Hub Centric Rings? Will it resolve the issue? (FYI, I recently did alignment and wheel balance. I even have the shop redo the wheel balance after the vibrating issue happened.)
    What I have done to my Prius so far: TRD lowering spring, Tanabe Front tower bar, Tanabe Front sway bar, TRD Rear sway bar & Front camber bolt.

    Please advise.

    Thanks.

    Samuel
     
  6. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    My control arm bolt was loose on the driver side front after I installed tanabe front sway and given me a bad shake felt like it was driving on ice or turning on its own. You sure u didn't leave anything loose when installing the rear sway.
    Check my couple post in this thread where I descriceomy latest problems... easier to let u read that then me type it again lol

    anyone with Camber wear after lowering car? | Page 2 | PriusChat

    I also had bad steering wheel vibration at high speeds and come to find out when me and a friend had pulled my front factory sway out we pulled the axle boot off but put it back in. At that time we didn't realize we pulled the axel out a bit and didn't force it back in and I ruined my axel... needed a new one and let dealer do it $800 later
     
  7. Prius2010BLK

    Prius2010BLK New Member

    Joined:
    Oct 29, 2014
    14
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Four
    I will definitely check again tonight to see if there is anything loose. I am assuming that it has to had something to do with the Front sway bar or Rear sway bar or Front camber bolt because I never have any problem after I installed the Front tower bar and TRD lowering springs. Specially, alignment & wheel balance were done quickly after.
     
  8. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    yea I'd definitely pull the install instructions for the front and rear sway and go over it all making sure it's all tight. If you can't find install instructions I have them in my build page which is located in my signature below
     
  9. Prius2010BLK

    Prius2010BLK New Member

    Joined:
    Oct 29, 2014
    14
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Four
    Thanks buddy.
     
  10. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
  11. golo

    golo Junior Member

    Joined:
    Sep 18, 2014
    7
    1
    0
    Location:
    corona ca
    Vehicle:
    2011 Prius
    Model:
    Three
    Hi Bino,

    Are there projector fog lights for the 2012+ fog light kit? Haven't found them

    thanks
     
  12. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    You find any issues?
     
  13. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    if I'm not mistaken the 2012+ foglights should be the same as the 2010s

    here's the link for the projector fogs:

    LUCE JAPAN企画 | カー用品の総合販売ストア
     
  14. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    Bino, just wondering if you are able to find the link for the Prius projector fogs ? I would like to buy a set for my Yaris :) BTw, how did they fit compared to the stock Prius fogs ?

    Thanks
     
  15. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    This is the only seller that I know of that sells the projector fogs for the toyota but it seems it has not updated their site.....

    LUCE JAPAN企画 | カー用品の総合販売ストア

    Try to see if they would update the site by next week...

    The kit that I got fits perfectly on the prius.... the housing is exactly the same as the OEM ones (same shape, dimension, housing...) .. so no fitment issues......

    were you able to get a set for your brz? I remember sending you a link for it.......
     
  16. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    Hello Bino,

    Yes, I was able to get them for the BRZ. Thanks again. Awesome cut :) Recently bought a Yaris and would like to have them on the Yaris as well :) apparently 2012 Yaris uses the same fogs as the 2010 Prius

    [​IMG]
     
  17. putty

    putty Member

    Joined:
    May 12, 2008
    147
    39
    0
    Location:
    somewhere in the swamps of Jersey
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I think I need those projectors for my fogs too, my HID's are all over the place, please let us know if you contact the seller,
    thanks
     
  18. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I removed the projector fogs that I have and will be putting it up for sale soon......

    [​IMG]

    [​IMG]
     
  19. putty

    putty Member

    Joined:
    May 12, 2008
    147
    39
    0
    Location:
    somewhere in the swamps of Jersey
    Vehicle:
    Other Hybrid
    Model:
    N/A
    bino was there something you didn't like about them?
     
  20. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    nothing wrong with the light or the pattern.... I just want t try out the other set that I have gotten a while back......