1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Will a 7 mm SSD fit in a 9 mm slot w/o an Adaptor ?

Discussion in 'Fred's House of Pancakes' started by SageBrush, Dec 4, 2014.

  1. SageBrush

    SageBrush Senior Member

    Joined:
    Jun 4, 2008
    11,627
    2,530
    8
    Location:
    Southwest Colorado
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    I'm upgrading my daughter's MacBook Pro (circa 'early 2011 edition) with an SSD. The space has room for a 9 mm high drive but the SSDs I'm considering are all 7 mm. One manufacturer includes an 'adaptor' that seems to be for this exact purpose while the other choices do not. And unfortunately the computer is not near me to just take a peek at the mount requirements.

    It seems possible that no adapter is needed, but I would hate to be wrong.
     
    #1 SageBrush, Dec 4, 2014
  2. 2k1Toaster

    2k1Toaster Brand New Prius Batteries

    Joined:
    Feb 14, 2010
    6,035
    3,855
    0
    Location:
    Rocky Mountains
    Vehicle:
    2006 Prius
    Model:
    Three
    You can buy "adapters" on eBay for a couple bucks. Or just put a piece of foam between it and the casing. But none of that matters too much unless she abuses the laptop and will routinely be subjecting it to extreme forces. Generally you attach the drive first by sliding it into the SATA power and data connectors. This alone is enough to suspend the drive from the air, it is a good relatively tight fit. Then you use 4 screws to screw it into the chassis of the laptop. Then the cover goes on top and screws/snaps into the chassis. The extra 2mm of air really doesn't matter.
     
    #2 2k1Toaster, Dec 4, 2014
    SageBrush likes this.
  3. KK6PD

    KK6PD _ . _ . / _ _ . _

    Joined:
    Mar 24, 2008
    4,003
    944
    118
    Location:
    Los Angeles Foothills
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Extra air space for cooling is always good! Win Win!
     
    #3 KK6PD, Dec 4, 2014
  4. SageBrush

    SageBrush Senior Member

    Joined:
    Jun 4, 2008
    11,627
    2,530
    8
    Location:
    Southwest Colorado
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    ^^ Tempting to think that, but sometimes contact is used for heat transfer.
    The adaptor I found however appears to just be a cut-out rectangle made from plastic, so air between the chassis and the drive seems to be OK.
     
    #4 SageBrush, Dec 4, 2014
  5. ny_rob

    ny_rob Senior Member

    Joined:
    Feb 28, 2012
    1,968
    813
    0
    Location:
    L.I.- NY
    Vehicle:
    Other Hybrid
    Model:
    N/A
    ^ The SSD drives don't get hot like mechanical drives- no need for surface to surface heat transfer.
    You can use anything that's non-conductive to keep the thinner drive from shaking around- I like to use a single strip of Velcro.
     
    #5 ny_rob, Dec 4, 2014
    SageBrush likes this.
  6. Onager

    Onager Junior Member

    Joined:
    Dec 7, 2007
    41
    82
    0
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Use a 2mm flatwasher as a spacer and keep the extra space for air circulation as well as a solid mount.
     
    #6 Onager, Dec 6, 2014
(You must log in or sign up to post here.)