1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Power window

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Dirtnapper, Aug 7, 2013.

  1. Dirtnapper

    Dirtnapper Member

    Joined:
    Apr 2, 2007
    104
    11
    0
    Location:
    MA
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    The power window on the passenger front side will go down using the switch on that door, but, I have to put it up using the switch on the driver's side. Any idea what is happening? Thanks.
     
    #1 Dirtnapper, Aug 7, 2013
  2. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,338
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    It sounds like the issue is with the passenger window switch since the window operates with the driver side switch.

    Check the continuity of the switch contacts with a multimeter. If you get high resistance try cleaning the contacts.
     
    #2 jdcollins5, Aug 7, 2013
  3. Dirtnapper

    Dirtnapper Member

    Joined:
    Apr 2, 2007
    104
    11
    0
    Location:
    MA
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    OK. Do I have to remove the whole panel or is there another way to get at the switch is my next question? Thanks.
     
    #3 Dirtnapper, Aug 7, 2013
  4. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,338
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    You should be able to remove the switch assembly from the arm rest.
     
    #4 jdcollins5, Aug 7, 2013
  5. Dirtnapper

    Dirtnapper Member

    Joined:
    Apr 2, 2007
    104
    11
    0
    Location:
    MA
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    It was very easy to pop the armrest piece off, and pop out the switch. Just swapped the back door one for now while the new one is on the way. Less than 20$ for a switch, shipped. Thanks.[​IMG]
     
    #5 Dirtnapper, Aug 8, 2013
    uart likes this.
  6. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,338
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    Good deal. It is always good to hear about an inexpensive fix.

    Good move in trying a known good switch in this location to verify the switch problem.
     
    #6 jdcollins5, Aug 8, 2013
  7. northcoaster

    northcoaster Junior Member

    Joined:
    Feb 12, 2010
    32
    2
    0
    Location:
    northcoast
    Vehicle:
    2006 Prius
    Model:
    N/A
    I have exactly the same problem but am leery of popping out the switch or armrest and breaking some small plastic clip that holds it in and then have to buy a whole new one....do I slip a flat screwdriver or butterknife or putty knife under it and get it out?

    I forgot, where did you get the new switch for $20? Thank you so much!! hope you get this and can reply
     
    #7 northcoaster, Jan 10, 2015
  8. Dirtnapper

    Dirtnapper Member

    Joined:
    Apr 2, 2007
    104
    11
    0
    Location:
    MA
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    I don't recall where I got it exactly,just do a Google. I got rid of that vehicle last April and dumped all records, got the prius v. It was nothing to pop the old one out.
     
    #8 Dirtnapper, Jan 10, 2015
(You must log in or sign up to post here.)