1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Boot / Tailgate / Trunk / shenanigan's

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by *Goldfinger*, May 13, 2015.

  1. *Goldfinger*

    *Goldfinger* Junior Member

    Joined:
    Dec 14, 2013
    80
    19
    0
    Location:
    Sheffield, England
    Vehicle:
    2007 Prius
    Model:
    N/A
    Sometimes when I come to open my boot it seems to part release (some movement, 1st stage opening) but will not open fully. I have to push down to fully close then re-attempt opening sequence before opening can be established. Any advice appreciated. NB I have cleaned and lubed the mechanism and nothing seems to be blocking it or stuck in it.
     
    #1 *Goldfinger*, May 13, 2015
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,401
    49,735
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    this happens to me once in awhile, but it is simply because i don't squeeze the switch hard enough.
     
    #2 bisco, May 13, 2015
    *Goldfinger* likes this.
  3. *Goldfinger*

    *Goldfinger* Junior Member

    Joined:
    Dec 14, 2013
    80
    19
    0
    Location:
    Sheffield, England
    Vehicle:
    2007 Prius
    Model:
    N/A
    Yes I think you're right, I've been experimenting with it today. I thought with it being electronic it would be either activated or not - nothing in-between, weird.
    Thanks Bisco
     
    #3 *Goldfinger*, May 15, 2015
    bisco likes this.
  4. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,763
    3,929
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    One thing to realise is that the latch release operates on a relay timer and the "latch open" is only about 2-3 seconds (even if you are squeezing the latch release button the entire time), so if you don't lift the tailgate as soon as you hear the initial release (which I think is what you referred to as "some movement, 1st stage opening") within that time it will re-latch in the semi open state. However, it should not be necessary to push down and fully close the hatch. You just need to release your squeeze on the release button (to reset the switch) and squeeze again, then lift immediately.

    hope this helps (Hope That Helps).
     
    #4 dolj, May 15, 2015
    *Goldfinger* and koolingit like this.
  5. *Goldfinger*

    *Goldfinger* Junior Member

    Joined:
    Dec 14, 2013
    80
    19
    0
    Location:
    Sheffield, England
    Vehicle:
    2007 Prius
    Model:
    N/A
    Hi Dolj,
    I just tried your suggestion and I think you have nailed this one. The more I thought I had a problem the more precisely (and slowly) I was doing the opening which, of course, only aggravated the issue. Thanks for your great post.
     
    #5 *Goldfinger*, May 16, 2015
  6. GrumpyCabbie

    GrumpyCabbie Senior Member

    Joined:
    Dec 14, 2009
    6,722
    2,121
    45
    Location:
    North Yorkshire, UK
    Vehicle:
    2010 Prius
    Model:
    III
    You might want to consider switching off the boot light incase the hatch doesn't close fully one time and thus running your 12v flat.
     
    #6 GrumpyCabbie, May 16, 2015
    Mendel Leisk and *Goldfinger* like this.
  7. *Goldfinger*

    *Goldfinger* Junior Member

    Joined:
    Dec 14, 2013
    80
    19
    0
    Location:
    Sheffield, England
    Vehicle:
    2007 Prius
    Model:
    N/A
    Good point GrumpyCabbie, I will do that.
     
    #7 *Goldfinger*, May 17, 2015
    GrumpyCabbie likes this.
(You must log in or sign up to post here.)