1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2008 prius codes c1310 p0A78 p0A7A

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by hybridonly, Jul 17, 2015.

  1. hybridonly

    hybridonly New Member

    Joined:
    Jul 17, 2015
    4
    0
    0
    Location:
    san fran
    Vehicle:
    2008 Prius
    Model:
    ----USA----
    Hello,

    I have a 2008 prius with 70k miles, it was involved in a front end accident and was repaired. Traction control seems to be blinking and cuts power. When I start to drive it and ignore the traction concern it throws up those codes. Any help would be greatly appropriated!

    Thanks!
     
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,474
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    DTC P0A78 is posted by the hybrid vehicle ECU and indicates a problem with the inverter, the hybrid vehicle ECU or the wiring harness connecting them.
    DTC P0A7A also is posted by the HV ECU and indicates a problem with the inverter or the wiring harness.
    DTC C1310 is posted by the skid control ECU and indicates that a problem with the hybrid drivetrain.

    I would start by looking for physical damage to the inverter or its wiring harness.
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,918
    49,500
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome! who repaired it? insurance involved? you need a dealer or qualified hybrid shoppe. if all else fails, check out luscious garage.
     
  4. hybridonly

    hybridonly New Member

    Joined:
    Jul 17, 2015
    4
    0
    0
    Location:
    san fran
    Vehicle:
    2008 Prius
    Model:
    ----USA----

    i will check out all of that to see what i can find... do you think changing the inverter itself will solve the problem?
     
  5. hybridonly

    hybridonly New Member

    Joined:
    Jul 17, 2015
    4
    0
    0
    Location:
    san fran
    Vehicle:
    2008 Prius
    Model:
    ----USA----

    my luck is i bought it like this, i do not mind taking a shot a fixing it before i send it off and spend more money at a shop.

    Thanks!
     
  6. hybridonly

    hybridonly New Member

    Joined:
    Jul 17, 2015
    4
    0
    0
    Location:
    san fran
    Vehicle:
    2008 Prius
    Model:
    ----USA----
    just got the car up on some jack stands to look under it and it seems like this has a brand new transmission on it?! could be a good thing or a bad thing... i do not know how to check if the wiring is good on the inverter i keep looking at the plugs and they all seem fine



    just an update
     
  7. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,474
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Maybe - but first do the troubleshooting tree as mentioned below.

    If you want to DIY I recommend you obtain the factory repair manual info at techinfo.toyota.com so that you can follow the troubleshooting tree for the logged DTC. That explains what to check. You need a digital multimeter so that you can measure resistance and voltage.
     
  8. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,852
    1,852
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    Send me a PM and I will give you a link to the repair manual.

    JeffD
     
  9. miguelzottoyahoocom

    miguelzottoyahoocom New Member

    Joined:
    Aug 9, 2016
    12
    1
    0
    Location:
    Mexico City
    Vehicle:
    2004 Prius
    Model:
    II
    Hi

    Im desperate im in mexico city i have a prius 2004 this car was not sold in mexico, mechanics dont know how works a hybrid not even in the toyota dealer PLEASE HELP ME OUT i have this issue for sometime with it

    1 year ago i replace the water pump the electric inverter water pump the one in front of the inverter left side back the headlight
    car work fine
    then i replace the coolant inverter pump 6 months ago the one in the left driver side in front the tire
    I already replace the thermostat
    replace all the coolant
    replace the radiator cap
    Car doesnt get hot no issues on that

    - Daily i drive the car around 30 miles no issue in the morning and 30 miles at night no issue on the car no codes no lights in the dash no nothing.
    - If i use the car all day long first appears the red triangle the lights abs and the VSC no problems in the car work fine after a while the brake sign lights up and then a biiiiiiiip sound apears so i need to shut the car off and then the biip goes away and the warnings still in the dash
    - so in city car works well in regular home work without lights if car works all day warnings in dash
    - If i get the car in highway to another city in an uphill road after hours the car has not power to go up and i need to wait for a while to get on the road again then stop and then wait and so on


    My codes are the following
    -P1116 ( in which i look around and probably i need to replace the temperature sensor TX109 and the coolant temperature sensor TX221) do i replace them?????
    - C1241 searching seems the aux battery not working i already check it out in an optima dealer and they told me is working fine
    - P0A7A tells on the inverter performance its necessary i replace it???? really is very expensive and plus the shipping into mexico more some guy tell me replace all the relays on the car not sure about that???? or do i need to replace the HV ecu?????
    - PA093 inverter pump which i already replace it twice??????


    REALLY WONDERING TO SOMEONE HELP i have spent a lot and the car is the same im a student and i have no money i dont want to trash the car but really i dont know what to do



    -