1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How to remove broken needle from inside windshield nozzle?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Garethh, Aug 7, 2015.

  1. Garethh

    Garethh Junior Member

    Joined:
    Sep 26, 2014
    38
    4
    0
    Location:
    Newport Beach, CA
    Vehicle:
    2006 Prius
    Model:
    Five
    Hi!

    I broke a needle inside one of the holes in one of the windshield nozzles. Call me ocd but it's really bugging me. I have to remove it somehow. I sprayed it with wd40 so it wouldn't get rusted in there. I tried a strong magnet but no go. I could use any suggestion as to how i can remove it.

    Thanks!
     
    #1 Garethh, Aug 7, 2015
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,413
    49,741
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it doesn't come out when you hit the washer button?

    did you try a magnet?

    might have to remove the nozzle to turn it upside down.
     
    #2 bisco, Aug 7, 2015
  3. Garethh

    Garethh Junior Member

    Joined:
    Sep 26, 2014
    38
    4
    0
    Location:
    Newport Beach, CA
    Vehicle:
    2006 Prius
    Model:
    Five
    How do I remove the nozzle?
     
    #3 Garethh, Aug 7, 2015
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    if it bothers you that much, just replace "both" nozzles. that way it'll spray correctly onto the windshield and not over your car
     
    #4 JC91006, Aug 7, 2015
  5. Garethh

    Garethh Junior Member

    Joined:
    Sep 26, 2014
    38
    4
    0
    Location:
    Newport Beach, CA
    Vehicle:
    2006 Prius
    Model:
    Five
    I am trying to avoid spending money for now. Besides, i don't know how to remove the nozzles to start with. If i could, it would make removing the broken needle so much easier.
     
    #5 Garethh, Aug 7, 2015
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    it should be accessible under the hood. take off the insulator and you'll see the 2 nozzles. just be careful you don't break the clips when you remove them.......chances are they will break since it's from 2006
     
    #6 JC91006, Aug 7, 2015
  7. Garethh

    Garethh Junior Member

    Joined:
    Sep 26, 2014
    38
    4
    0
    Location:
    Newport Beach, CA
    Vehicle:
    2006 Prius
    Model:
    Five
    I will try it right now. What should i do not to break the clips?
     
    #7 Garethh, Aug 7, 2015
  8. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    maybe you should wait until you buy new nozzles? they are not that expensive and they'll help your OCD because it'll all work properly.

    I don't know how to prevent you from breaking clips......plastics get brittle as they age, and it's 9 years old now
     
    #8 JC91006, Aug 7, 2015
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,413
    49,741
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    be as gentle as possible. visually, try to understand how the clips come off, before proceeding, so you won't be forcing them. spray the with some lube beforehand?
     
    #9 bisco, Aug 7, 2015
  10. Garethh

    Garethh Junior Member

    Joined:
    Sep 26, 2014
    38
    4
    0
    Location:
    Newport Beach, CA
    Vehicle:
    2006 Prius
    Model:
    Five
    I tried but couldn't do it with the tools i have. :/ It's hard to put pressure to the clip from both sides and pull at the same time. I need a third hand.
     
    #10 Garethh, Aug 7, 2015
  11. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,413
    49,741
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    local gas station?
     
    #11 bisco, Aug 7, 2015
(You must log in or sign up to post here.)