1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 Prius starts...eventually.. Hybrid System Indicator screen blank

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by BobbbyL, Nov 11, 2015.

Tags:
  1. BobbbyL

    BobbbyL Junior Member

    Joined:
    Feb 18, 2015
    4
    0
    0
    Location:
    Minneapolis
    Vehicle:
    2010 Prius
    Model:
    II
    For the past few days, when I press the power button, I hear the beeps and then every dashboard symbol appears - except the Hybrid System Indicator screen is completely dark. The car seems to be turned on - but when I try to put the car in reverse to back out of my garage, it won't change gears. When I go to press Power to shut it down, it takes about 5-10 seconds to shut off.

    I found that opening and closing the driver's side door helps reset something so that the HSI turns on and the car eventually starts.

    I just replaced the batter about 2 years ago. Was living in Minnesota at the time (replaced it during winter) and now live in Palm Springs. The temp here has been cold (for here, anyway) - in the 50s and 60s.

    Any ideas?
     
    #1 BobbbyL, Nov 11, 2015
  2. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    It's hunted
     
    #2 mrbigh, Nov 11, 2015
  3. Kramah313

    Kramah313 Active Member

    Joined:
    Oct 3, 2015
    408
    322
    0
    Location:
    Dallas, TX
    Vehicle:
    2012 Prius
    Model:
    Four
    Are you using a scangauge or similar OBD device? Maybe the CAN bus is getting confused with data and opening/closing the door sends a message that clears it out? Just a crazy guess
     
    #3 Kramah313, Nov 11, 2015
  4. BobbbyL

    BobbbyL Junior Member

    Joined:
    Feb 18, 2015
    4
    0
    0
    Location:
    Minneapolis
    Vehicle:
    2010 Prius
    Model:
    II
    Am I using what? I'm not using anything - just trying to start my car!
     
    #4 BobbbyL, Nov 11, 2015
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,690
    49,387
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    hows the 12 volt? even at 2 years, it's worth checking, takes 2 minutes.
     
    #5 bisco, Nov 11, 2015
  6. Kramah313

    Kramah313 Active Member

    Joined:
    Oct 3, 2015
    408
    322
    0
    Location:
    Dallas, TX
    Vehicle:
    2012 Prius
    Model:
    Four
    I was wondering you had a scangauge plugged into your OBD port, sounds like probably not. If not that, 12V would probably be my next guess for odd problems such as this.
     
    #6 Kramah313, Nov 11, 2015
(You must log in or sign up to post here.)